Traffic and Highway Engineering
Traffic and Highway Engineering
5th Edition
ISBN: 9781305156241
Author: Garber, Nicholas J.
Publisher: Cengage Learning
Question
Book Icon
Chapter 15, Problem 4P
To determine

(a)

Using the vertical curvature determine minimum length of vertical curve.

Expert Solution
Check Mark

Answer to Problem 4P

579ft

Explanation of Solution

Given information:

Station (535+24.25)

Elevation 300ft

Grades G1=+2%

Grades G2=1%

Design speed of 65mi/h.

Calculation:

Length of curve is given by formula,

L=KA......(1)

A is the grade difference between G1=+2% and G2=1%

A=G1-G2A=2-(-1)A=3%

Rate of vertical curvature from textbook Table 15.4 which is based on stopping sight distance K=65mph=193

  Traffic and Highway Engineering, Chapter 15, Problem 4P

Substitute in equation (1) we get,

L=KAL=193×3L=579ft

Minimum length of vertical curve is 579ft.

To determine

(b)

Stations and elevations of BVC and EVC.

Expert Solution
Check Mark

Answer to Problem 4P

Station at BVC is (532+34.75) and station at EVC is (532+13.75).

Tangent elevation at BVC is 294.21ft and at EVC is 297.1ft.

Explanation of Solution

Given information:

Station (535+24.25)

Elevation 300ft

Grades G1=+2%

Grades G2=1%

Design speed of 65mi/h.

Calculation:

BVC station=300ft elevation station-L2BVC station=(532+24.25)5792BVC station=(532+34.75)

EVC station=300ft elevation station+L2EVC station=(532+24.25)+5792EVC station=(532+13.75)

Therefore station at BVC is (532+34.75) and station at EVC is (532+13.75).

Tangent elevation at BVC=Y-G1x200Y is elevation point and x is elevation at length of curve.Tangent elevation at BVC=300-2×579200Tangent elevation at BVC=294.21ft

Tangent elevation at EVC=Y+G2x200Y is elevation point and x is elevation at length of curve.Tangent elevation at EVC=300+( 1)×579200Tangent elevation at EVC=297.1ft

Therefore tangent elevation at BVC is 294.21ft and at EVC is 297.1ft.

To determine

(c)

Elevation at each 100ft station.

Expert Solution
Check Mark

Answer to Problem 4P

Station BVC distance

ft(x)

Tangent elevationoffsetCurve elevation(Tangent elevation)
532+34.750294.210294.21
533+0065.25295.520.12295.4
534+00165.25297.520.71296.81
535+00265.25299.520.83297.69
536+00365.25301.523.46298.06
537+00465.25303.525.61297.91
538+00565.25305.528.28297.24
538+13.75579305.798.69297.1

Explanation of Solution

Given information:

Station (535+24.25)

Elevation 300ft

Grades G1=+2%

Grades G2=1%

Design speed of 65mi/h.

Calculation:

Determine the offset,

Y=Ax2200Lx=distance from BVC elevation=532+24.75-533=65.25Y=3×65.252200×579Y=0.12ft

Curve elevation=Elevation at tangent-offsetCurve elevation=(294.21+ 65.25 100×2)0.12Curve elevation=295.52-0.12Curve elevation=295.40ft

For every 100ft station the values are tabulated below,

Station BVC distance

ft(x)

Tangent elevationoffsetCurve elevation(Tangent elevation)
532+34.750294.210294.21
533+0065.25295.520.12295.4
534+00165.25297.520.71296.81
535+00265.25299.520.83297.69
536+00365.25301.523.46298.06
537+00465.25303.525.61297.91
538+00565.25305.528.28297.24
538+13.75579305.798.69297.1
To determine

(d)

Station and elevation of high point.

Expert Solution
Check Mark

Answer to Problem 4P

Station of high point=536+20.75

Elevation of high point=298.07ft

Explanation of Solution

Given information:

Station (535+24.25)

Elevation 300ft

Grades G1=+2%

Grades G2=1%

Design speed of 65mi/h.

Calculation:

Distance of the high point of BVC is given by,

Xhigh=LG1( G 1 - G 2 )Xhigh=579×2( 2-( -1 ))Xhigh=386ft

Station of high point=station of BVC+XhighStation of high point=(532+34.75)+386Station of high point=(532+34.75)+3+86Station of high point=536+20.75

Difference beteween both elevation of BVC and highpoint.

Elevation of high point=Tangent elevation of BVC+YhighElevation of high point=294.21+3.86Elevation of high point=298.07ft

Conclusion:

Therefore elevation of high point is 298.07ft and Station of high point is 536+20.75

Want to see more full solutions like this?

Subscribe now to access step-by-step solutions to millions of textbook problems written by subject matter experts!
Students have asked these similar questions
Two roads with grades of +4.5% and -3% meet at station 15 + 100 at an elevation of 72.344 m. If the required rate of change of grade for the parabolic curve to be fitted between those two roads is 0.4% per 20 m stations, determine the following: a. The required length of the curve b. Stationing and elevation at PC and PT c. Location and elevation of the apex of the curve d. Elevation at a point Q that has a distance of 15 m from PI
PROBLEM 7 A +2 percent grade on an arterial highway intersects with a -1 percent grade at station 535 + 24.25 at an elevation of 300 ft. If the design speed of the highway is 65 mi/h, determine the stations and elevations of the initial point of vertical curve (PVC), the final point of vertical curve (PVT), the high point, and the elevation of each 100-ft station.
Design a vertical curve (i.e., Determine length of the curve as well as station and elevation of the vertical curve's PVC and PVT) with the given PVI (station and elevation given the figure below) to go through a future intersection location at the point at which the vertical curve is flat. Report the vertical curve's design speed to the nearest 5 miles per hour. PVC Future Intersection Station = 100+00 G1 = -2.6% PVT PVI G2 = 1.0% Station = 99+00 Elevation = 228 ft %3|
Knowledge Booster
Background pattern image
Similar questions
SEE MORE QUESTIONS
Recommended textbooks for you
Text book image
Traffic and Highway Engineering
Civil Engineering
ISBN:9781305156241
Author:Garber, Nicholas J.
Publisher:Cengage Learning