Steam is supplied to a fully loaded 100-hp turbine at 200 psia with u; = 1163.3 Btu/lb, v; = 2.65 ft³/lb and u1 = 400 ft/s. Exhaust is at 1 psia with uz = 925 BTU/lb, v2 = 294 ft2/lb and uz = 1100 ft/s. The heat loss from the steam in the turbine is 10 Btu/lb. Neglect potential energy change. Determine: a. the work per Ib steam b. the steam flow rate in Ib/hr u, = 1163.3 Btu/lb u, = 925 BTU/lb V, = 2.65 ft /lb v, = 294 ft /lb P,= 200 psia Turbine P2= 1 psia

Steam is supplied to a fully loaded 100-hp turbine at 200 psia with u; = 1163.3 Btu/lb, v; = 2.65 ft³/lb and u1 = 400 ft/s. Exhaust is at 1 psia with uz = 925 BTU/lb, v2 = 294 ft2/lb and uz = 1100 ft/s. The heat loss from the steam in the turbine is 10 Btu/lb. Neglect potential energy change. Determine: a. the work per Ib steam b. the steam flow rate in Ib/hr u, = 1163.3 Btu/lb u, = 925 BTU/lb V, = 2.65 ft /lb v, = 294 ft /lb P,= 200 psia Turbine P2= 1 psia

College Physics

11th Edition

ISBN:9781305952300

Author:Raymond A. Serway, Chris Vuille

Publisher:Raymond A. Serway, Chris Vuille

Chapter1: Units, Trigonometry. And Vectors

Section: Chapter Questions

Problem 1CQ: Estimate the order of magnitude of the length, in meters, of each of the following; (a) a mouse, (b)...

See similar textbooks

Similar questions

2. Steam is supplied to a fully loaded 100-hp turbine at 20 psia with u, = 1163.3 Btu/lb, v, = 2.65 ft/lb and v, = 400 fps Exhaust is at 1 psia with u, = 925 Btu/lb, v, = 294 ft/1b an v, = 1100 fps. The heat loss from the steam in the turbin is 1 Btu/lb. Neglect potential energy change and determine (a) th work per lb steam and (b) the steam flow rate in lb/h. %3D %3D %3D %3D %3D Solution P, = 200 psia u, 1163.3 Btu/lb. v, = 2.65 ftlb %3D %3D %3D P2 = 1 psia u, = 925 Btu/lb V, = 294 ft³lb %3D %3D v, = 400 fps v, = 1100 fps Q = -10 Btu/lb %3D %3D Turbine + W = 100 hp %3D 2- 2 P, + K, + Wn + U, + Q = , + K, + W+ U, + W
The concrete slab of a basement is 11m long, 8 m wide and 0.2 m thick. During the winter, temperatures are nominally 17°C and 10°C at the top and bottom respectively. If the concrete has thermal conductivity of 1.4 W/m K, what is the rate of heat loss through the slab? If the basement is heated by a gas furnace operating at an efficiency of 90% using natural gas priced at Cg = Php 1.00/MJ, what is the daily cost of heat loss?
1. Steam is supplied to a fully loaded 100hp turbine at 294psia, with u¡ =1163.3 Btu/lb, v1 = 2.65 ft³/lb and U1 = 400 ft/s. Exhaust is at 1psiawith u2 = 925 Btu/lb, V2= 200 ft³/lb and U2 = 1100 ft/s. The heat loss from the steam in the turbine is 10 Btu/lb. Neglect the potential energy change and determine (a) work per lb of steam and (b) steam flow rate in lb/hr. %3D
4.00 Litres of hydraulic oil is placed in a cylinder with a movable piston, on which a heavy block is placed. The hydraulic oil pressure is maintained at 2.45x105 Pa and the temperature of the oil is raised by 45K. The oil is in liquid phase and expands by a small amount of 1.2x10-3m3. Calculate the work done on the oil and the change in internal energy of the oil. The specific heat capacity of hydraulic oil is 2300J/(kg•K) and its density is 800kg/m3
A 56 kW electric furnace measures 1.2m x 1.3m x 0.7m. When the temperature inside the furnace is 1613 ºC, a block of aluminum with a mass of 283 kg and a temperature of 18 ºC is placed inside. Assuming the heat loss from the furnace walls is 529 W/m, how long (in min) will it take to heat the block to the furnace temperature? (Specific heat of aluminum is 0.90 kJ/kg. K)
Suppose you have 2.5kg of steam at 100 degrees celcius occupying 6.5 meters cubed at a pressure of 1.013 x 10^5 Pa. When the steam condenses to water at 100 degrees celcius it occupies a volume of 0.55 meters cubed. If the latent heat of vaporization of water is 2.26 x 10^6 J/kg, what was the change in the water's internal energy?
. The following are the Heat rate curves pertaining to three units in a plant. Unit 1: Min 250 MW, Max 600 MW: F1=7870 +82.2P₁ +0.01862P₁² Unit 2: Min 150 MW; Max 400 MW: F2=6500 + 27.5P2 + 0.0154P2² Unit 3: Min 20 MW; Max 250 MW: F3=4136 + 65.64P3 + 0.03784P3² Fuel cost of Unit -1 = Rs. 1.2 / MBtu Fuel cost of Unit -2 = Rs. 1.1 / MBtu Fuel cost of Unit -3 = Rs. 1.5/ MBtu Based on priority list method find out a strict priority order. Write down Priority List and Unit commitment scheme.
Compressed air can be pumped underground into huge caverns as a form of energy storage. The volume of a cavern is 6.3 x 105 m³, 5 and the pressure of the air in it is 7.4 × 106 Pa. Assume that air is a diatomic ideal gas whose internal energy U is given by U = nRT. If one home uses 30.0 kWh of energy per day, how many homes could this internal energy serve for one day?
An ideal gas is brought through an isothermal compression process. The 5.00 mol of gas goes from an initial volume of 226.4 x 10-6 m³ to a final volume of 134.9 × 10-6 m³. If 8890 J is released by the gas during this process, what are the temperature T and the final pressure pf of the gas? T = Pf= x10' TOOLS K Pa
4.00 Litres of hydraulic oil is placed in a cylinder with a movable piston, on which a heavy block is placed. The hydraulic oil pressure is maintained at 2.45 × 105Pa and the temperature of the oil is raised by 45 K. The oil is in the liquid phase and expands by a small amount of 1.2 × 10‒3 m3. Calculate the work done on the oil and the change in internal energy of the oil. The specific heat capacity of hydraulic oil is 2300 J/(kg·K) and its density is 800 kg/m3
Heat is supplied to 25 lbm of ice (Cp = 0.5 BTU/lbm-F) at 15F at the rate 160 BTU/sec. How long will it take to convert the ice to steam (Cp = 0.5 BTU/lbm-F) at 215 F?
The concrete slab of a basement is 11 m long and 8 m wide, and 0.20 m thick. During the winter, temperatures are nominally 17°C and 10°C at the top and bottom surfaces, respectively. If the concrete has a thermal conductivity of 1.4 W/mK, what is the rate of heat loss through the slab? If the basement is heated by a gas furnace operation at an efficiency of 90%, and natural gas is priced at $0.02. MJ, what is the daily cost of the heat loss. Answer: QLOSS = 4.312 kW, COST = $8.28/day