In a one-shell and two-tube heat exchanger, cold water with inlet temperature of 20°C is heated by hot water supplied at the inlet at 80°C. The cold and hot water flow rates are 5000 kg/h and 10,000 kg/h, respectively. If the shelland- tube heat exchanger has a UAs value of 11,600 W/K, determine the cold water and hot water outlet temperatures. Assume cpc = 4178 J/kg·K and cph = 4188 J/kg·K.

In a one-shell and two-tube heat exchanger, cold water with inlet temperature of 20°C is heated by hot water supplied at the inlet at 80°C. The cold and hot water flow rates are 5000 kg/h and 10,000 kg/h, respectively. If the shelland- tube heat exchanger has a UAs value of 11,600 W/K, determine the cold water and hot water outlet temperatures. Assume cpc = 4178 J/kg·K and cph = 4188 J/kg·K.

Principles of Physics: A Calculus-Based Text

5th Edition

ISBN:9781133104261

Author:Raymond A. Serway, John W. Jewett

Publisher:Raymond A. Serway, John W. Jewett

Chapter17: Energy In Thermal Processes: The First Law Of Thermodynamics

Section: Chapter Questions

Problem 69P: An aluminum rod 0.500 m in length and with a cross-sectional area of 2.50 cm2 is inserted into a...

See similar textbooks

Related questions

Q: An overhead 25 m-long, uninsulated industrial steam pipe of 100 mm diameter is routed through a…

Q: Lake Erie contains roughly 4.50E+11 m3 of water. How much heat is required to raise the temperature…

A: Given(s): The mass of water: m=4.5×1011 m3 The initial temperature of the water, 11.5 oC The final…

Q: A freezer is to convert 1.87 kg of water at 27.6°C to 1.87 kg of ice at -3.4°C. If the coefficient…

A: Heat transfer.

Q: A test is conducted to determine the overall heat transfer coefficient in a shell-and-tube…

A: The rate of heat transfer from the oil to the water is, '

Q: You have mW = 3.7 kg of water in an insulated container. You add mI = 0.75 kg of ice at TI = -21°C…

A: Given information: The symbols have the same meaning as described in the question.

Q: A shell-and-tube heat exchanger with 2-shell passes and 12-tube passes is used to heat water (cp =…

Q: A double-pipe parallel-flow heat exchanger is used to heat cold tap water with hot water. Hot water…

Q: A 2-m * 1.5-m section of wall of an industrial furnaceburning natural gas is not insulated, and the…

Q: A counter-flow double-pipe heat exchanger is to heat water from 20°C to 80°C at a rate of 1.2 kg/s.…

A: The rate of heat transfer in the heat exchanger is determined as,

Q: A well-sealed room contains 60 kg of air at 200 kPa and 25°C. Now solar energy enters the room at an…

Q: The oil-containing stream enters the counter-flow heat exchanger with a flow rate of 7258 kg / h,…

Q: Most automobiles have a coolant reservoir to catch radiator fluid that may overflow when the engine…

Q: A two-shell passes and four-tube passes heat exchanger is used for heating a hydrocarbon stream (cp…

Q: "Consider a heat engine with a piston chamber that has a diameter of 30 mm, a cold reservoir at 285…

A: Given data: The temperature of cold reservoir is TL=285 K. The temperature of hot reservoir is…

Q: Initially you have mwater=4.2kg of water at Twater=66 degrees celcius in a insulated container. You…

A: Recall Q=mc∆T Also, principle of calorimetry. Heat lost by hotter body=heat gained by colder body

Q: A freezer is to convert 1.73 kg of water at 28.7°C to 1.73 kg of ice at -4.43°C. If the coefficient…

Q: A building with an internal volume of 400 m3 is to be heated by a 30-kW electric resistance heater…

A: The expression to determine the time from the energy balance,

Q: Cold water enters a counter-flow heat exchanger at 10°C at a rate of 8 kg/s, where it is heated by a…

Q: Steam at 320°C flows in a stainless steel pipe (k =15 W/m·K) whose inner and outer diameters are 5…

A: Diagram of the system:

Q: Calculate the rate of heat loss in breathing from heating up the air and moisturizing the air in…

A: In this question we have to calculate the rate of heat loss in breathing from heating up the air and…

Q: A freezer is to convert 1.75 kg of water at 27.5°C to 1.75 kg of ice at -4.63°C. If the coefficient…

Q: Suppose you have 2.5 kg of steam at 100°C occupying 6.5 m° at a pressure of 1.013 x 10° Pa. When the…

Q: How much energy must be removed from the system to turn liquid copper of mass 1.5kg at 1083 degrees…

A: Given data: The mass of copper is m=1.5 kg. The initial temperature is T=1083℃. The final…

Q: When air expands adiabatically (without gaining or losing heat), its pressure P and volume V are…

Q: Air (cp = 1.005 kJ/kg·°C) is to be preheated by hot exhaust gases in a cross-flow heat exchanger…

A: a) The rate of heat transfer is ,

Q: Consider a surface of area A at which the convection and radiation heat transfer coefficients are…

A: We are given a surface of area A, at which the convection and radiation heat transfer coefficients…

Q: Most automobiles have a coolant reservoir to catch radiator fluid that may overflow when the engine…

Q: A test is conducted to determine the overall heat transfer coefficient in anautomotive radiator that…

A: Given data: The number of tubes in the radiator is n = 40 tubes. The internal diameter of the…

Q: A refrigerator door is opened and room-temperature air (20°C) fills the 1.50 m 3 compartment. A 10.0…

A: In this problem we have to Calculate how much heat will be removed by the refrigerator. For this we…

Q: A soldering iron has a cylindrical tip of 2.5 mm in diameter and 20 mm in length. With age and…

A: It is given that,

Q: A naked patient undergoes surgery in a warm room. Determine the ratio Pc /Pe, where Pc is the…

Q: How much work is done on the steam when 1.32 mol of water at 100°C boils and becomes 1.32 mol of…

A: Given that, latent heat of vaporization of water =2.26 x 106 J/kg pressure =1 atm =1.013 x 105…

Q: Newton's Law of Cooling says that the rate at which a body cools is proportional to the difference…

A: The equation F(t) =T +Cekt will help us to solve the problem F(t) = temperature of the body. T =…

Q: In the laboratory, calorimetry can be used to determine the latent heat of fusion of water, LfLf. If…

A: Given Mass of ice mi=30 gm mi=0.03 kg Mass of calorimeter cup mc= 60gm=0.06kg Mass of water mw=170…

Q: lump of aluminum is heated to 93oC and then dropped into 9.0 kg of water at 5.2oC. Assuming that the…

A: GivenMass of aluminium lump, mal=2.7 kgTemperature of Aluminium, Tal=93°C=93+273=366 KMass of water,…

Q: Most automobiles have a coolant reservoir to catch radiator fluid that may overflow when the engine…

Q: A cylindrical resistor element on a circuit board dissipates 0.15 W of power in an environment at…

Q: At an altitude of 11,000 m (a typical cruising altitude for a jet airliner), the air temperature is…

Q: When air expands adiabatically (without gaining or losing heat), its pressure P and volume V are…

Q: A total of 105 J of work is done on a gaseous refrigerant as it undergoes expansion. If the internal…

Q: A thirsty nurse cools a 2.40 L bottle of a soft drink (mostly water) by pouring it into a large…

A: We use the principle of calorimetry to solve this, Q = m×c× dT Where, dT = final temperature -…

Q: Consider an opaque plate that is well insulated on the edges and it is heated at the bottom with an…

Q: Cold water (cp = 4180 J/kg·K) leading to a shower enters a thin-walled double-pipe counter-flow heat…

Q: Cold water (cp = 4180 J/kg·K) enters the tubes of a heat exchanger with 2-shell passes and 20-tube…

Q: Solar radiation is incident on a 5 m2 solar absorberplate surface at a rate of 800 W/m2.…

A: Given Data: The area of the surface plate is, A=5 m2 The heat supplied rate is, qsolar=800 W/m2 The…

Question

In a one-shell and two-tube heat exchanger, cold
water with inlet temperature of 20°C is heated by hot water
supplied at the inlet at 80°C. The cold and hot water flow rates
are 5000 kg/h and 10,000 kg/h, respectively. If the shelland-
tube heat exchanger has a UAs value of 11,600 W/K,
determine the cold water and hot water outlet temperatures.
Assume cpc = 4178 J/kg·K and cph = 4188 J/kg·K.

Expert Solution

This question has been solved!

Explore an expertly crafted, step-by-step solution for a thorough understanding of key concepts.

SEE SOLUTION Check out a sample Q&A here

Step 1

Step 2

Step 3

Step 4

Step 5

Step 6

Step 7

Step 8

Step 9

Step 10

Step by step

Solved in 10 steps with 7 images

SEE SOLUTION Check out a sample Q&A here

Knowledge Booster

Learn more about

Need a deep-dive on the concept behind this application? Look no further. Learn more about this topic, physics and related others by exploring similar questions and additional content below.

Similar questions

An aluminum rod 0.500 m in length and with a cross-sectional area of 2.50 cm2 is inserted into a thermally insulated vessel containing liquid helium at 4.20 K. The rod is initially at 300 K. (a) If one-half of the rod is inserted into the helium, how many liters of helium boil off by the time the inserted half cools to 4.20 K? Assume the upper half does not yet cool. (b) If the circular surface of the upper end of the rod is maintained at 300 K, what is the approximate boil-off rate of liquid helium in liters per second after the lower half has reached 4.20 K? (Aluminum has thermal conductivity of 3 100 W/m K at 4.20 K; ignore its temperature variation. The density of liquid helium is 125 kg/m3.)
The electric heating systems used in many houses consist of a simple duct with resistance heaters. Air is heated as it flows over resistance wires. Consider a 15-kW electric heating system. Air enters the heating section at 100 kPa and 17°C with a volume flow rate of 150 m3/min. If heat is lost from the air in the duct to the surroundings at a rate of 200 W, determine the exit temperature of air.
A certain car has 14 L of liquid coolant circulating at a temperature of 95 degrees Celsius through the engine’s cooling system. Assume that, in this normal condition, the coolant completely fills the 3.5 L volume of the aluminum radiator and the 10.5 L internal cavities within the aluminum engine. When a car overheats, the radiator, engine, and coolant expand and a small reservoir connected to the radiator catches any resultant coolant overflow. Estimate how much coolant overflows to the reservoir if the system goes from 95 degrees Celsius to 106 degrees Celsius. Model the radiator and engine as hollow shells of aluminum. The coefficient of volume expansion for coolant is 410x10^-6 degrees Celsius
Jill takes in 0.0140 mol of air in a single breath. The air is taken in at 20.0°C and exhaled at 35.0°C. Her respiration rate is (1.30x10^1) breaths per minute. At what average rate does heat leave her body due to the temperature increase of the air? Provide your answer to three significant figures. HINT: Use the molar specific heat at constant volume to find the heat loss, where Cv = 5R/2 (for an ideal diatomic gas).
A double-pipe parallel-flow heat exchanger is used to heat cold tap water with hot water. Hot water (cp = 4.25 kJ/kg·K) enters the tube at 85°C at a rate of 1.4 kg/s and leaves at 50°C. The heat exchanger is not well insulated, and it is estimated that 3 percent of the heat given up by the hot fluid is lost from the heat exchanger. If the overall heat transfer coefficient and the surface area of the heat exchanger are 1150 W/m2·K and 4 m2, respectively, determine the rate of heat transfer to the cold water and the log mean temperature difference for this heat exchanger.
A classroom has dimensions 8.00 m x 10.00 m x 3.00 m. A 1000 W electric space heater is being used to warm the room from 5.00°C to 20.00°C on a cold morning. If the density of air is 1.29 kg/m°, and the specific heat capacity of air is 1004 J/(kg-K), how long will it take to heat the room? Assume no loss of thermal energy to the surroundings. A) 1.30 minutes B) 241 minutes C) 45.3 minutes O D) 77.7 minutes
An electric stove burner has surface area 325 cm² and emissivity e = 1. The burner consumes 1500 W and is at 900 K. If room temperature is 300 K, what fraction of the burner's heat loss is from radiation?
A solar hot-water-heating system consists of a hot-water tank and a solar panel. The tank is well insulated and has a time constant of 60 hr. The solar panel generates 2200 Btu/hr during the day, and the tank has a heat capacity of 3°F per thousand Btu. If the water in the tank is initially 105°F and the room temperature outside the tank is 81°F, what will be the temperature in the tank after 10 hr of sunlight? What is U(t), the rate of temperature change due to the solar heating panel? Select the correct choice below and, if necessary, fill in the answer box to complete your choice. O A. U(t)= °F/hr OB. U(t) is unknown. xample Get more help Clear all Check answer
A liquid food product (P) is being cooled from 80°C to 30°C in an indirect heat exchanger using cold water (W) as a cooling medium. If the product mass flow rate is 1800 kg/h, determine the water flow rate required to accomplish product cooling if the water is allowed to increase its temperature from 10°C to 20°C in the heat exchanger. The specific heat of the product is 3.8 kJ/kg K, and the value for water is 4.1kJ/kg K.
Six kilograms of liquid water at 0° C is put into the freezer compartment of a Carnot refrigerator. The temperature of the compartment is -15.3° C, and the temperature of the kitchen is 24.9° C. If the cost of electrical energy is ten cents per kilowatt · hour, how much does it cost to make two kilograms of ice at 0° C?
A building with an internal volume of 400 m3 is to be heated by a 30-kW electric resistance heater placed in the duct inside the building. Initially, the air in the building is at 14°C, and the local atmospheric pressure is 95 kPa. The building is losing heat to the surroundings at a steady rate of 450 kJ/min. Air is forced to flow through the duct and the heater steadily by a 250-W fan, and it experiences a temperature rise of 5°C each time it passes through the duct, which may be assumed to be adiabatic. (a) How long will it take for the air inside the building to reach an average temperature of 24°C? (b) Determine the average mass flow rate of air through the duct.
The temperatures shown in the figure have been determined via 2-dimensional finite difference analysis for the boundary conditions shown. What is the total heat transfer going out of the system? Ax = Ay = 19 cm. Express your answer in W. h = 35 W/m² K T=30°C convection boundary 2 49.52°C T = 100°C 5 84.69°C 1 T = 120°C Insulated 47.87°C 4 81.18°C 3 59.93°C 6 97.86°C