The puncture resistance of the insulator used in an AA cable with a conductor cross section of 150mm2 is 200 Kv / cm for the most convenient layout. What is the maximum effect value of the voltage that can be applied to this cable with relative dielectric coefficient Er = 4.4 and the capacity of the unit length of the cable? (Take the dielectric constant of the gap, 8,86.10e-12)

The puncture resistance of the insulator used in an AA cable with a conductor cross section of 150mm2 is 200 Kv / cm for the most convenient layout. What is the maximum effect value of the voltage that can be applied to this cable with relative dielectric coefficient Er = 4.4 and the capacity of the unit length of the cable? (Take the dielectric constant of the gap, 8,86.10e-12)

Power System Analysis and Design (MindTap Course List)

6th Edition

ISBN:9781305632134

Author:J. Duncan Glover, Thomas Overbye, Mulukutla S. Sarma

Publisher:J. Duncan Glover, Thomas Overbye, Mulukutla S. Sarma

Chapter4: Transmission Line Parameters

Section: Chapter Questions

Problem 4.1P: The Aluminum Electrical Conductor Handbook lists a dc resistance of 0.01558 ohm per 1000 ft at 20C...

See similar textbooks

Similar questions

The Aluminum Electrical Conductor Handbook lists a dc resistance of 0.01558 ohm per 1000 ft at 20C and a 60-Hz resistance of 0.0956 ohm per mile at 50C for the all-aluminum Marigold conductor, which has 61 strands and whose size is 1113 kcmil. Assuming an increase in resistance of 2 for spiraling, calculate and verify the dc resistance. Then calculate the dc resistance at 50C, and determine the percentage increase due to skin effect.
The property of insulating material which makes the breakdown voltage high in a cable is ...... Good Mechanical strength O High conductivity O High dielectric strength O High insulation resistance
A copper conductor is connected in parallel with twice its length of aluminum conductor. The resistivity of copper is (0.0159 µ0. m) and that of aluminum is (0.0254 µ0. m). If the diameter of the aluminum is (10 mm). Determine the necessary diameter of the copper conductor in order that each conductor will carry the same current.
A copper conductor is connected in parallel with twice its length of aluminum conductor. The resistivity of copper is (0.0159 µN. m) and that of aluminum is (0.0254 µn. m). If the diameter of the aluminum is (10 mm). Determine the necessary diameter of the copper conductor in order that each conductor will carry the same current.
Consider a 3-phase, 50 HZ, 11 KV distribution system. Each of conductors is suspended by an insulator string having two identical porcelain insulators. The self-capacitance of the insulator is 5 times the shunt capacitance between link and ground. Find the voltages across two insulators.
i) Calculate V1 and V2 for the voltage across the string insulator having phase voltage of 33kV for transmission line using details tabulated in the Table 3(a). Table 3(a) Type of Insulator Shunt Capacitance between each unit 0.1 C String to junction Self -Capacitance of each insulator ii) With the help of a suitable schematic diagram and necessary theoretical explanation, illustrate how to improve the efficiency of the suspension insulator.
The number of disc insulators used in a suspension insulator setup with string efficiency 85 %, phase voltage 66 kV, and the voltage across insulator nearest to conductor 9 kV is .. ...
The number of disc insulators used in a suspension insulator setup with string efficiency 80 %, phase voltage 33 kV, and the voltage across insulator nearest to conductor 11 kV is .......................... Complete the answer.
A single core cable has a conductor diameter of 1 cm and insulation thickness of 0.4 cm. If the specific resistance of insulation is 5*1014 Q-cm, the insulation resistance of 2 km cable will be?
A three phase, 11 KV, underground cable system, consider a single core of conductor radius 0.5 cm diameter and lead sheath of 1.25 cm. The core and lead sheath have been separated by two intersheaths with radius 0.75 cm and 1 cm. Draw the cable core, dielectric and intersheath layers showing the thickness of each layer, then determine the voltages on the both intersheaths. Suppose the maximum stress on the layers are the same.
Iron material is used for the design of Fuse Select one: True False
4. The value of a at OdegC of a conductor is 1/236 per °C. Find the value of a at 18degC.