The field of view is the maximum area visible through the lenses of a microscope, and it is represented by a diameter. To determine the diameter of your field of view, you can place a transparent metric ruler under the low power (10X) objective of a microscope. You would focus the microscope on the scale of the ruler and measure the diameter of t field of vision in millimeters. Refer to the image taken of this preparation below. What is the approximate field of view as seen by this 10X objective. Note: This microscope has 10X eyepiece, giving a total magnification of 100X. 10000 1mm 2mm 3mm 4mm 1 mm

The field of view is the maximum area visible through the lenses of a microscope, and it is represented by a diameter. To determine the diameter of your field of view, you can place a transparent metric ruler under the low power (10X) objective of a microscope. You would focus the microscope on the scale of the ruler and measure the diameter of t field of vision in millimeters. Refer to the image taken of this preparation below. What is the approximate field of view as seen by this 10X objective. Note: This microscope has 10X eyepiece, giving a total magnification of 100X. 10000 1mm 2mm 3mm 4mm 1 mm

Biomedical Instrumentation Systems

1st Edition

ISBN:9781133478294

Author:Chatterjee

Publisher:Chatterjee

Chapter15: Instrumentation In Medical Imaging

Section: Chapter Questions

Problem 9P

See similar textbooks

Similar questions

Calculate the diameter of the field of view for each total magnification on your microscope in millimeters (mm) and then convert this value to micrometers (um): 4,500 um Scanning (40X): 1.8 mm x 100X/40X = 5 mm = %3D Low power (100X): FOV diameter = 1.8 mm = 1,800 um 1.8 mm x 100X/400X = 0.45 mm =450 um 180 um High power (400X): 1.8 mm x 100X/1000x = 28 mm = Oil immersion (1000X): %3D Draw and estimate the length of a single Euglena (high power) and Paramecium (low power): Paramecium Euglena total magnification total magnification FOV diam. um FOV diam. um length um length um
Previous question: The field of view is the maximum area visible through the lenses of a microscope, and it is represented by a diameter. To determine the diameter of your field of view, you can place a transparent metric ruler under the low power (10X) objective of a microscope. You would focus the microscope on the scale of the ruler and measure the diameter of the field of vision in millimeters. Refer to the image taken of this preparation below. What is the approximate field of view as seen by this 10X objective. Note: This microscope has a 10X eyepiece, giving a total magnification of 100X. The image shows the 1mm is for this question. - Answer for this question was 3mm.
Calculate the diameter of the field of view for each total magnification on your microscope in millimeters (mm) and then convert this value to micrometers (um): 4.5 mm = 4,500 um Scanning (40X): 1.8 mm x 100X/40X = Low power (100X): FOV diameter 1.8 mm = 1,800 um High power (400X): 1.8 mm x 100X/400X = 0.45 mm = 450 um Oil immersion (1000X): O.18m 180 um 1.8 mm x 100x/1000X = Draw and estimate the length of a single Euglena (high power) and Paramecium (low power): Paramecium Euglena total magnification total magnification 400x yoox FOV diam. FOV diam. um uni length length um
The field of view (FOV) is the entire circular image we see when looking into the eyepiece. The diameter of the FOV gets smaller as we increase magnification. It can be measured by using a stage micrometer like a ruler, measuring from edge to edge. Notice that the stage micrometer is 1000 microns (µm) in length, and the field of view under the lowest magnification is 5000 µm. Describe how we measure it?
The objective lenses of the microscopes used in this course are all parfocal. What does having parfocal objective lenses mean? Question options: The slide has to be moved away from the objective lens (i.e., lowered) when switching between objective lenses. None of these choices The objective lenses have optimized light gathering capability. Once in focus, you may switch between objective lenses with only fine focus adjustment required.
Differentiate between the limit of resolution of the typical light microscope and that of the unaided human eyes the relationship between the depth of field and magnification is that When magnification increases, the depth of field decreases. Name two procedures (steps) you should do to achieve the maximum resolution when using the oil immersion lens State the relationship between the working distance of an objective lens and its magnification power “The coarse focus knob can be used to adjust the focus when using any of the objective lenses”. Is this statement true or false? If it is false, please correct it. When using the oil immersion lens but you cannot focus, what should you should not do? And what you should do? What does this statement mean: “Your microscope is parfocal”? What is the significance of condenser lens? Multiple choice question: The most useful adjustment for increasing image contrast in low power magnification is _______ Closing down the diaphragm Closing one…
Which of the following is true about the relationship between depth of field and magnification? There is no relationship. When magnification increases, depth of field decreases. When magnification increases, depth of field increases. Stereomicroscopes offer a lesser depth of field than compound microscopes. The depth of field of a microscope determines how much magnification it can achieve.
which objective lens is in place if the object you are viewing is magnified 1000x? (assume ocular lens magnification = 10x)
Using the scanning (4x) objective and the metric ruler, record the number of millimeters you see along with the letter “e.” Your value: 2 millimeters Convert the figure you attained to micrometers (1 millimeter = 1,000 micrometers). This is the diameter of the field of view for the low-power objective (LPD). The field of view is the circular field you see when you look through the oculars. The field of view changes at different magnifications. Your value (LPD): 2,000 micrometers -please help me with the problem in the picture.
Determine the total magnification of a microscope when using the 4X objective lens. (Showyour work/math)
Complete the following table by calculating the total magnification of the different objectives of the microscope with the given eyepieces. OBJECTIVES OCULAR Designation Magnification Focal Length Numerical Aperture (NA) Final magnification with: 10x 15x 25x Scanner 4x 46mm 0.10 LPO 10x 16mm 0.25 HPO 40x 4mm 0.55 OIO 100x 1.8mm 1.30
Asap