Steam flows steadily through an adiabatic turbine. The inlet conditions of the steam are 4 MPa, 500°C, and 80 m/s and the exit conditions are 30 kPa, 92 percent quality, and 50 m/s. The mass flow rate of the steam is 11 kg/s. The properties of the steam are v₁ = 0.086442 m³/kg, h₁ = 3446 kJ/kg, and h₂ = 2437.7 kJ/kg. P₁ = 4 MPa T₁ = 500°C V₁= 80 m/s Steam m kg/s 0 D V ↓ P₂= 30 kPa x₂ = 0.92 V₂= 50 m/s Wout Problem 05.048.c - Turbine flow Determine the turbine inlet area. The turbine inlet area is 0.0122 m2

Steam flows steadily through an adiabatic turbine. The inlet conditions of the steam are 4 MPa, 500°C, and 80 m/s and the exit conditions are 30 kPa, 92 percent quality, and 50 m/s. The mass flow rate of the steam is 11 kg/s. The properties of the steam are v₁ = 0.086442 m³/kg, h₁ = 3446 kJ/kg, and h₂ = 2437.7 kJ/kg. P₁ = 4 MPa T₁ = 500°C V₁= 80 m/s Steam m kg/s 0 D V ↓ P₂= 30 kPa x₂ = 0.92 V₂= 50 m/s Wout Problem 05.048.c - Turbine flow Determine the turbine inlet area. The turbine inlet area is 0.0122 m2

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

Uz な、以う0 Vrz VF = Vz Ure Maxe Dr. Ayser Muneer Turbomachines Example (5-2) An inward flow reaction turbine is supplied with water at a rate of (600 Vsec) with a 3 velocity of flow of (2 m/sec). the velocity of periphery and velocity of whirl at inlet are 24 m/sec and 18 m/sec respectively. Assuming radial discharge at outlet and the velocity of flow to be constant, find; 1- Vane angle at inlet, and 2- Head of water on the wheel. V Solution Vn Q = 0.6 m/sec, Vn=2m/sec, uj=24 m/sec, Vu=18m/sec, V1=Vr2 m/sec
Problem (5.3) The outlet angles of the nozzle and blades of a two-row impulse turbine are in succession 16°, 18°, 20° and 30° and the corresponding nozzle and blade velocity coefficients are 0.92, 0.72, 0.78 and 0.84. The flow through the nozzle is at the rate of 4 kg/s, and the supply is at 1.2 MPa and 50°C superheat. The chamber pressure is 0.5 MPa and the blade speed is 1/5 that of the jet speed leaving the nozzle. Determine the work done and the blade efficiency.
Problem (5.3) The outlet angles of the nozzle and blades of a two-row impulse turbine are in succession 16°, 18°, 20° and 30° and the corresponding nozzle and blade velocity coefficients are 0.92, 0.72, 0.78 and 0.84. The flow through the nozzle is at the rate of 4 kg/s, and the supply is at 1.2 MPa and 50°C superheat. The chamber pressure is 0.5 MPa and the blade speed is 1/5 that of the jet speed leaving the nozzle. Determine the work done and the blade efficiency. Ans. [391.67 kW, 61.13 %]
1. In less than 100 words, describe how the reciprocating air compressors (applicable to a particular purpose) may be used to save energy cost and still prevent disadvantages on other factors 2. Provide the evidence of investigation: Photographs, videos, calculations, information sources and other reasonable evidences (not downloaded from internet) during research work 3. Outcome: Cost implications or future projections / calculations from the idea(s
In the first stage of the impulse turbine, the adiabatic heat drop in the nozzle is 350 (kJ/kg), the velocity coefficient of the nozzle is 0.96, the nozzle exit angle is 20 degrees, the circumferential speed of the rotor is 350 m/s, the rotor The exit angle is 30 degrees. Find the next value.(1) Nozzle efficiency, (2) Draw a velocity triangle (scale), (3) Circumferential force acting on the rotor blade (4) Find the forward efficiency of the turbine.
In a certain community, they are using steam-powered turbines to produce electricity. Steam flows adiabatically in a turbine through a 3" pipe at a velocity of 10 ft/s. It exits through the exhaust with a standard 10" pipeline. Calculate the power output in Btu/s of the turbine. Condition of steam at the entrance: 200 psi, 600°F; at the exit: 4 psi, 160°F. [Hint: Power is the product of work and mass flow rate.]
Problem (5.2) An impulse turbine has a number of pressure stages (pressure compounded turbine). The nozzle angle in the first stage is 20° and the blade exit angle =30°. The blade speed =120 m/s and the velocity of steam leaving nozzle =300 m/s. If the blade velocity coefficient =0.8 and the nozzle efficiency =0.85, find the work done per kg steam and the stage efficiency. If the steam supplied to the first stage is at 2 MPa and 250°C and the condenser pressure =0.01 MPa estimate the number of stages required. Ans. [36 kJ/kg, 68 %, x 4 ]
QUESTION 7 multi-stage axial flow turbine, and the pressure drop Air is expanded in a very small. Assuming that air behaves as a pressure-temperature relationships for the following processes: across each stage is perfect gas with ratio of specific heats y, derive A) Reversible adiabatic expansion: B) Irreversible adiabatic expansion, with small stage efficiency np; C) Reversible expansion in which the heat loss in each stage is a constant fraction k of the enthalpy drop in that stage.
b. Using your turbine work output estimation in (a), determine the design mass flowrate for the steam. The characteristics of the steam as below. → carn ot heat engine Work out put =O•6 Parameters Inlet Outlet 350 °C 2 MPa 100m/s X = 0.85 Temperature Pressure Velocity 50 kPa 50 m/s
Q4: Why the stroke length of the racing cars' engines is always smaller than its bore diameter?
Identify what is the system in this problem and write the general energy balance equation (no need to solve) A turbine is driven by a system that enters the turbine at the ff. conditions: 200 kg/h, 39 atm, 501 deg C, 49 m/s linear speed. The steam exits at a point 8 meters below the inlet stream of the turbine with the following conditions: atmospheric pressure, 290 m/s speed. 69000 W of shft work is delivered by the turbine while 100 kcal/h heat is lost. What is the specific delta H?
Q2//The rotational-speed of an impulse turbine wheel is 3000 r.p.m. The nozzles are inclined at 20° and their efficiency is 0.89. The isentropic heat drop for the stage is 159 kJ/kg. If the blade speed ratio is 0.4, the blade speed coefficient is 0.82, and the blade efficiency is 0.76. Find for steam flow rate of 15 kg/s: 1. The mean blade ring diameter. 2. The power developed by the stage. B = 32.4°:Be : 38.5°). %3D %3D Answer (1.355m, 1613.2 kW,