Answered: Q4/ The floor plan shown in Figure 3…

Q4/ The floor plan shown in Figure 3 contains of one-way and two-way spanning slabs as detailed the figure. Determine type and magnitude of the loading on beam CD

Fundamentals of Geotechnical Engineering (MindTap Course List)

5th Edition

ISBN:9781305635180

Author:Braja M. Das, Nagaratnam Sivakugan

Publisher:Braja M. Das, Nagaratnam Sivakugan

Chapter15: Retaining Walls, Braced Cuts, And Sheet Pile Walls

Section: Chapter Questions

Problem 15.12P

See similar textbooks

Related questions

Q: 20 IN H 1=3 m 3 d 1=3 m 1-3 m Which of the following most nearly gives the force in member cd due to…

Q: Depth of wall ype of support Dewatering/Piping

A: Generally 4 types of wall is used in excavation for stability of excavation work.…

Q: An effective rainfall of 2-hour duration produced a flood hydrograph peak of 200 m³/s. The flood…

Q: Which of the following statement is correct for a strip foundation (Length x m) placed on the ground…

A: For strip footing, the shape factor should be 1.0.

Q: ng span of of 25 kN/

Q: A flanged bolt coupling consists of six 20- mm diameter steel bolts spaced evenly around a bolt…

Q: ۱۰:۱۲ docs.google.com Given: Maximum shear FORCE =13 KN, and moment of inertia = 120 x 10^6 mm^4.…

A: Given: Beam cross section dimensions Shear force Moment of inertia To find: Maximum shear stress…

Q: Calculate the reactions at A and D

A: Given:

Q: Q5: Cantilever beam loaded as shown in fig., draw the shear force diagram and bending moment…

A: Draw shear force and bending moment diagram.

Q: The force P is applied at d = 50 mm from the bottom as shown. Compute the normal stress at section…

A: Find the equivalent force couple system at the section a-a. Then using stress equation the normal…

Q: Q4/By the DMD method, find the area enclosed by the traverse ABCD Stations X (m) Y(m) A 0 0 B -50.0…

Q: Q-1: Determine the resultant force at pins A, B and C on the three member frame. 800 N С 200 N/m 2m…

A: length of member AC = 2sin 600= 2.31 m load on member AC = 200 x 2.31 =462 N horizontal component =…

Q: Four forces are exerted on the eyebolt as shown. If the net effect on the bolt is a direct pull of…

Q: The state of plane stress at a point is represented on the element shown in the figure. The element…

Q: A beam is shown in the figure below, and the flexural stiffness of the beam section is constant EI:…

A: GIVEN PL = 4kn TOTAL SPAN = 8M

Q: Determine the resultant moment of forces about the point O? Neglect the beam thickness *KN 15m #2kN…

Q: 2.6 The sanding-drum mandrel shown in Fig. P2.6 is made for use with a hand drill. The mandrel is…

Q: Where, X=36 A retaining wall (frictionless) is shown in a) Plot the variation of active and…

A: surcharge q = 1.5 x 36 = 18 kPa bulk density of sand γbulk= 17 kN/m3 total height of wall = 36 m…

Q: 28. Find discharge ratio if slope of a channel is 1/225 and 1/625

A: Given data: Slope of channel, S1=1225 Slope of channel, S2=1625

Q: Cantilever beam loaded as shown in fig., draw the shear force diagram and bending moment diagram. 20…

Q: How long does it take for flies to develop from an egg? 3 to 4 days 3 to 4 hours 9 to 11 days 9 to…

A: English question it is been asked that how long it takes for flies to develop from an egg

Q: Which of the following is NOT TRUE as an assumption in the elastic analysis of circular members…

A: Assumptions Involved in the Theory of Pure Torsion 1. Material is isotropic, homogeneous and…

Q: Agitate the sieves by hand or by mechanical apparatus for a sufficient period. The criterion for…

A: Increasing the agitation duration increases the likelihood of a particle and an open sieve aperture…

Q: PROBLEM NO. 1: The simply supported beam has a length of 7.2 meters and carries a total service load…

A: Given Data:Length = 7.2mService load = 40.16kN/mfc=21MpaFy=420h=

Q: Static measurement is more accurate than dynamic measurement

A: The Global Positioning System is one which provides the time, position and velocity of the object…

Q: The W8 X 48 structural A-36 steel column is fixed at its bottom and free at its top. If it is…

A: Since the load is not eccentric then the load will be acting at center with couple.

Q: Q1. A. Inside a 60-mm diameter cylinder a piston of 59 mm diameter rolates col Both the cylinder and…

A: rpm of piston = 1850 rpm

Q: The total horizontal and vertical stresses at a point X in a saturated sandy medium are 170 kPa and…

Q: What is the recommendations of Bulk density of concrete lab test? What is the errors that might…

A: Explanation- The density testing in hard concrete is performed to determine the relative yield, and…

Q: 8 In a stereo pair, which of the following statements is true (multiple choice questions) A. The…

A: Stereo pair is the pair of photos of same area taken from the aerial survey that are taken at 2…

Q: A 20 KN weight is suspended by two wires as shown in the figure. The length of each wire is 2 meter.…

Q: Explain what is eutrophication of lakes. Also brief how it can be avoided?

A: Eutrophication of lakes- It is a process in which lakes get infested with algae and silt up…

Q: A horizontal collimation test is performed on an automatic level following the procedures described…

A: Answer We are given Instrument set up at point 1 rod reading at A (ha) = 3.886 ft rod reading at B…

Q: Problem 1. Draw FBD, and find the reactions in the beam loaded as shown in the figure. Check…

A: Given data in question Span member length UDL UVL point load Angle To find out REactions FBD

Q: Compute the force in all members of the truss shown in Fig. T-08. 50 KN 30 KN MATHalino.com B 4 m 5m…

Q: Rigid bar ABC is supported by two identical solid bronze [σY = 331 MPa; E = 105 GPa; α = 22.0 ×…

Q: A 4340 steel plate containing an interior crack that is 2cm long, 10cm wide, and 0.5 cm thick. The…

Q: Draw the NTM diagrams for frame on the picture. 90= F/a 10000 a 2a F = 1 kN a = 1 m

Q: supports the load L. Determine the forces in mem- bers CG and GF. Identify those members for which…

A: Apply method of section horizontally between the member CF and BGAssume the length of horizontal bar…

Q: Find the flow rate in m'/sec/m at right angles to the cross section shown through the permeable soil…

Q: (B) (C) mu (D) O Troge mm mm Which of the following most nearly the degree of static indeterminacy…

Q: %" Dia bolts in standard holes. W8 FIGURE 2 134 3@3.00

Q: P₁ Determine the maximum moment and the maximum shear in the girder bridge due to the truck loading…

A: Given data:

Q: teristics and design selection

A: Protection from the elements, such as wind and rain, as well as curious spectators, are all common…

Q: A circular steel shaft with length, L (m) has an outer diameter, d2 (mm) and inner diameter, d1…

Q: What do radians represent?

A: The radian is indeed the SI instrument for measuring angles, represented by the sign rad, and is…

Q: Five interior angles of a six-sided polygon traverse were observed as A = 43°17′08″, B = 202°04′57″,…

A: five interior angles are given. A = 43°17′08″, B = 202°04′57″, C = 103°33′44″, D = 98°35′15″, and E…

Q: The tension member shown in Fig.3 is a PL 1/2 x 8 of A36 steel. The member is connected to a gusset…

A: Given data:- For grade A 36, FY=36 ksiFu=58 ksit=0.5 inw=8 in Dead load =95 kips Live load =9 kips

Q: Flow over lengthy pipelines is seen in oil processing. A pipeline with a 4-inch schedule 40 steel…

Q: What are the two types of digital images? (multiple chosos que ens) A. Grid format B. Square format…

A: Asked: To choose the two types of digital images from the given choices. Given Choices: A. Grid…

Concept explainers

Asphalt Binders and Mixtures

Asphalt binders are subsidiary products procured during the refining process of petroleum while manufacturing gasoline, diesel, and similar petroleum products. Asphalt binders are obtained from the residue that remains after the distillation of petroleum, this residue is further subjected to steam distillation and oxidation to remove the traces of gas oil present in the residue. Certain additives or modifiers are also added to asphalt binders to alter them to suit different applications.

Question

i need the answer quickly

Q4/ The floor plan shown in Figure 3 contains of one-way and two-way spanning slabs as
detailed the figure. Determine type and magnitude of the loading on beam CD
2.0 m
3.0m
2.0m
15 kN/m²
E
C
H
-
+
7.0 m
15 kN/m²
F
3.0 m
D
5.0 m
B

Expert Solution

This question has been solved!

Explore an expertly crafted, step-by-step solution for a thorough understanding of key concepts.

SEE SOLUTION Check out a sample Q&A here

given data

VIEW

drawing tributary area for each beam

VIEW

determining magnitude of loadings on beam CD

VIEW

drawing loadings on beam CD

VIEW

Step by step

Solved in 4 steps with 4 images

SEE SOLUTION Check out a sample Q&A here

Knowledge Booster

Learn more about

Need a deep-dive on the concept behind this application? Look no further. Learn more about this topic, civil-engineering and related others by exploring similar questions and additional content below.

Similar questions

Q1: For the interior beam B of the slab system shown, with section shown, check the beam adequacy for shear at critical Slab thickness .=150 mm , section. ,f = 27 MPa, d=415mm f, = 410 MPa. Wa = 5.19 KN /m²,w1 =4.86 KN /m? All columns= 300* 300 mm, 600 t150 3ф20 540 #13@150 stirrups 60 20 85 14 6 m 6 m
5. Determine whether the slabs shown is a two-way or one-way and also 3m S-1 approximately find the thickness of 4.5m S-2 each slab. 4m 2m
Determine the flexural stresses in the following sections using the Transformed-area method 1) 48" 3 #9 | 12″ | 14" 21" 3" M = 100 ft-k n = 10
A continuous-strip wall footing is shown in cross section in Fig. P5.5. It is proposed that tensile reinforcement be provided using No. 8 (No. 25) bars at 16 in. spacing along the length of the wall, to provide a bar area of 0.59 in²/ft. The bars have strength f, = 60,000 psi, and the footing concrete has f' = 4000 psi. The critical section for bending is assumed to be at the face of the supported wall, and the effective depth to the tensile steel is 12 in. Check to ensure that sufficient development length is available for the No. 8 (No. 25) bars, and if hooks are required, sketch details of the hooks, giving dimensions. Note: If hooks are required for the No. 8 (No. 25) bars, prepare an alternate design using bars having the same area per foot but of smaller diameter such that hooks could be eliminated; use the largest bar size possible to minimize the cost of steel placement. 66"- 12" 27"- 27"- Wall 12" 16" Page 227 / 813 No. 8 (No. 25) bars at 16" spacing
Problem 3 (Pro 5.116 Textbook): Prob 5.16 A long concrete bearing wall has vertical expansion joints placed every 40 feet. Determine the required width of the gap in a joint if it is wide open at 20°F and just barely closed at 80°F. Assume a = 6 x10-6 /°F. %3D CONCHETE BEARING WALL EXPANSION JOINT 120 40' 401 40!
Question 5: Calculate the collapse load (P.) of the continuous beam shown. Total uniform load 4P Mr 2 Mr 112 1/2
12) Determine the shear capacity, øVe, for a one foot- wide design strip for a solid one-way slab 8 in. deep of normal weight concrete. f. 3 ksi, f, 40 ksi, d=6.94 in. %3D
4. How would the capacity of the shear wall with aspect ratio 3:1 be different from shear wall with aspect ratio 1:1 ?
Mu-WuiLn/16 A Calculate area of steel reinforcement and spacing between bars which required to resist ultimate moment at point B of one-way slab shown in figure, Assume: fy = 350 Nlmm², fc' =20 N/mm², Wu 20 kN/m² Ø=0.9, b=1000 mm, d=160 mm. bar diameter 12 mm 05 2006 Wartano B Ln1-3.6m Wail/11 Ww.cn/11 D E WaLa/16 Ln2-4m
A masonry terrace of 65mm thick concrete surface with 35mm thick cement tiles rest on 100mmx 200mmtimber spaced at 250mm on centers acting as simple beam with effective span of 3.8 meters. Weight of woodis7.5Kn/M^3 and masonry to be 18KN/m^3. Ew = 13.8GPa. Given:Allowable stresses for bending = 12 MPaFor shear parallel to the grain = 0.9 MPaDeflection = 1/360 of spana. Determine the uniform load it could support with respect to bending.
Given a 16x9m rectangular slab arrangement with columns at a 4m grid in the long direction by 3m grid in the short, determine the moments to be used for design at the supports and midspans of all slabs and design the corresponding reinforcement. Assume that the total slab thickness is 150mm, the weight of finishes is 280 kgs/m and imposed load is 450 kgs/m. Also given: f=500 N/mm², fa =30 N/mm², cover 30 mm.
What is the positive design bending moment at midspan of a four edges continuous slab of 10 m spans in each direction having class N reinforcement and supporting 2 kPa dead load (G) and 2 kPa live load (Q)? You may use the load combination as 1.2 G +1.5 Q. O 15.95 kNm O 12.96 kNm O 14.45 kNm 10.93 kNm