Note: Read the question carefully and give me right solution according to the question. A pile is made of recycled aggregate material. The pile has a diameter of 95 ft. at the base, and 30 ft. at the top. It is 23 ft. high. The volume of the pile (yd3) is most nearly: a ) 1,350 b ) 89,643 c ) 2460 d ) 3320

Note: Read the question carefully and give me right solution according to the question. A pile is made of recycled aggregate material. The pile has a diameter of 95 ft. at the base, and 30 ft. at the top. It is 23 ft. high. The volume of the pile (yd3) is most nearly: a ) 1,350 b ) 89,643 c ) 2460 d ) 3320

Principles of Foundation Engineering (MindTap Course List)

9th Edition

ISBN:9781337705028

Author:Braja M. Das, Nagaratnam Sivakugan

Publisher:Braja M. Das, Nagaratnam Sivakugan

Chapter12: Pile Foundations

Section: Chapter Questions

Problem 12.10P

See similar textbooks

Similar questions

Which advantages fall under which type of pile? Please answer this asap. For upvote. Thank you very much
Compute the compressive force at the most stressed pile for each pile cap given in the table below. All column loads are unfactored and acting at the pile group centroid unless noted otherwise. My LL My (kN*m) y Pile Cap DL (kN)* LL(kN) LL Mx (kN*m) PC-1 1800 300 400 350 PC-2 1800 300 400 350 Mx *Pile cap weight is not included in the DL Notes: Pile diameter=600mm Use a pile cap thickness of 450mm for all cases with a conc unit wt of 23.5kN/m? PC-1 РС-2 3600 3600 1800 1800 1200 000 0081 009S
3- The pile is classified as Micro (Mini) pile when its diameter is: *less than 0.2m less than 0.3m *less than 0.1m *less than 0.15m
Q- A concrete pile has size 40 cm x 40 cm, ultimate load carrying capacity of pile is 1200 kN, and с x is 50 kN/m² and 0.6 respectively. What is the length of pile?
How does the Pile capacity can be determined?
Define The local availability of each pile type
A 24 inch square prestressed concrete pile is to be driven to a depth of 68 ft into the following soil profile: Undrained Shear Strength, S (lb/ft²) 1000 1300 2000 2500 Soil Classification Silty clay ITT Clayey silt Clay Clay Depth (ft) 0-10 10-32 32-40 40-70 Unit Weight, y (lb/ft³) 110 118 116 119 The groundwater table is at a depth of 5 ft. Make layers with 8 or 10 ft. Using the alpha model with a factor of safety of 3.0, compute the ASD allowable downward load capacity, Pa.
A HP 13x100 steel pile of length 40 feet is driven with a hammer of rated energy 30 kip-ft, weight 12 kips. A. Use the Gates method to determine refusal criterion if the ultimate pile capacity is to be 600 kips. B. Will the pile survive during installation?
The results of pile load tests are usually considered to be the “correct” load capacity, and all other analysis methods are compared to this standard. However, there are many ways to conduct load tests, and many ways to interpret them. Therefore, can we truly establish a single “correct” capacity for a pile? Explain.
Describe about the pile impedance.
a 15-meter precast concrete pile is to be lifted. if the unit weight of concrete is 23.54 kN/m3. And the section of the pile measures 400 mm by 400 mm.
7.6 A dozer with as S-blade has pushed a normal load onto a level area. The height of this load measured at the inside edge of each track was 7 ft and 7.4 ft. The width of the load at the inside edge of each track was 8.1 ft and 8.4 ft. The greatest length of the pile was 16 ft. What is the capacity of the blade?