5- Please solve this question in detail. Thanks Q.5. A hollow circular shaft has an external diameter of 120 mm, and the internal diameter isthree-fourths the external diameter. If the stress at a fiber inside is 36 MPa, due to a torque Tapplied, find this torque, the maximum shear stress, and the angle of twist per unit length. G = 85MРа.

for solution refer below images. NOTE:- generally value of modulus of rigidity (G) is in Gpa, but in…

Answered: applied, find this torque, the maximum…

Engineering

Mechanical Engineering

applied, find this torque, the maximum shear stress, and the angle of twist per unit length. G = 85 MPa.

Mechanics of Materials (MindTap Course List)

9th Edition

ISBN:9781337093347

Author:Barry J. Goodno, James M. Gere

Publisher:Barry J. Goodno, James M. Gere

Chapter3: Torsion

Section: Chapter Questions

Problem 3.11.14P: A long, thin-walled tapered tube AB with a circular cross section (see figure) is subjected to a...

See similar textbooks

Related questions

Q: A cross section of the leading edge of an airplane wing is shown in the figure. The enclosed area is…

A: Given : A = 82 in2 T = 100 kip.in

Q: Q2. Consider a circular shaft that is attached to a fixed support at one end as shown in figure. If…

A: The cross-section of the free end shaft is as follows: From the above figure, the length of the arc…

Q: Find the shear stress in 10 mm diameter shaft subjected to 2 kW power transmission at 100 rpm.

A: Given data:

Q: A solid shaft 2 inch in diameter is subjected into two torques .If the total angle of twist is eight…

A: Givend=2inT1=200 lb ft=200×12=2400 lb in

Q: A hollow aluminium tube used in a roof structure has an outside diameter 104mm and an inside…

A: A) Angle of twist for the given max shear stress in a hollow shaft: The angle of twist of a hollow…

Q: Find the maximum stress developed in a stepped shaft when it is subjected to a: i) Torque of “T” Nm.…

Q: QUESTION 8 A torque T is applied on an aluminium shaft acting at the ends (see figure). The shaft is…

Q: A solid circular shaft is subjected to combined bending and torsion and and made of steel having…

Q: A solid steel shaft must not twist through more than 30 in a 6-m length when subjected to a torque…

Q: A solid shaft of diameter 10 mm is subjected to a torque of 15 N/m. considering modulus of rigidity…

A: The angle of twist is 2.74° (Option D is correct).

Q: A 7/8 in. diameter shaft made out of ductile material is used to transmit power from motor. The…

A: given diameter of the shaft, d=78inch=0.875inchmaximum allowable sheer stress, ζhallow=14.5ksiRPM,…

Q: Find the maximum shear stress and rate of twist for an applied torque Mi for the section shown in…

A: given; where;⇒t=thickness⇒a and b are dimensions. ⇒t<<a,b

Q: The shaft of a motor has a length of 15 times its diameter and has a maximum twist of 1.5 degrees…

A: Given: The length of shaft of motor, L = 15d The maximum twist in shaft = 1.5o The torque applied, T…

Q: A steel shaft 50 mm diameter and 500 mm long is subjected to a twisting moment of 1100 N-m, the…

A: Given data: d=50 mm=0.05 mL=500 mm=0.5 mT=1100 N.mθ=0.6°=0.010472 rad Need to determine the maximum…

Q: the twisting angle. The modulus of Rigidity for the shaft is 20 GN/m? • for the missing torque T =…

A: For the shafts in series,…

Q: If o = 50 ksi, Oy = 10 ksi, and Txy = 30 ksi, what is the absolute maximum shear stress for the…

Q: c) The steel alloy shaft having a diameter of 38 mm is used to transmit torque, T as shown in Figure…

A: Given Data: τ=80kPa (i) Shear stress is to be given by: Maximum torque that can be transmitted.

Q: A hollow steel shaft is stressed to 55 MPa by a torque of 100,000 ft-lb. If the inside diameter is…

Q: A torsional bar is subjected to two external torques (10Nm and 5Nm) and a distributed torque…

A: according to the details given above

Q: A solid steel post is subjected to pure torsion. Given: -post Diameter = 65 mm -length = 2.75 m…

Q: A shaft running at 700 r.p.m transmits 18 kW. Assuming allowable shear stress in shaft is 70 N/mm²,…

Q: Find the diameter of a shaft to transmit twisting moments varying from 800 N-m to 1600 N-m. The…

Q: In a shaft of 5 m length a stress of 75 MPa was developed. Find the diameter of the shaft if the…

A: Given data: τ=75 MPaL=5 mθ=3°G=83 GPa Need to determine the diameter of the shaft.

Q: 1. The hollow steel shaft (G=12 000000 Psi) must transmit a torque of 300000 Ib-in. The total angle…

A: Given data: The transitted torque, T=300000 lb·in. The shear modulus, G=12000000 psi. The angle of…

Q: Question 4 A shaft used for a water pump has a diameter of 50 mm and a length of 0.7 m long and is…

A: GIVEN DATA- a) Diameter D=50mm , L=0.7m , G=90GPa , Torque T=1200Nm b) Hollow shaft with internal…

Q: Find the maximum stress developed in a stepped shaft when it is subjected to a: i) Torque of “T” Nm.…

Q: 7. A shaft with a length of 5 m is subjected to a twisting moment of T=4x10 N.mm. If J=620x10 mm,…

Q: 1. The solid line shaft in Fig. 1 is made of steel and transmits the input power of 35 kW at pulley…

A: The Answer is Below

Q: 5. The shaft of a motor has a length of 15 times its diameter and has a maximum twist of 1.5 degrees…

Q: A motor drives a shaft at 56 Hz and delivers 11 kW of power (see figure). 56 Hz 11 kW (a) If the…

Q: A hollow shaft and a solid shaft constructed of the same material have the same length and the same…

Q: If allowable shear stress in the shaft is 80N/mm? and the torque equivalent(Te) is 1.23 x106 N-mm.…

Q: A steel shaft 50 mm diameter and 500 mm long is subjected to a twisting moment of 1100 N-m, the…

Q: A circular shaft of the dimensions shown in the following figure is subjected to three torques : T1…

Q: A hollow steel shaft transmits 600 kW at 500 r.p.m. The maximum shear stress is 62.4 MPa. Find the…

Q: Consider a two-component rod fixed at the left end. The first component (on the left, positioned…

Q: The outer diameter of the shaft is 175 mm and the diameter ratio is 1.25. Find the polar modulus of…

Q: A 2-inch line shaft is transmitting 20 hp rotating at 200 rpm, carrying two pulleys spaced 30 inches…

Q: Read the question carefully and give me all right solutions. Internal torque at rod 1 (kip-ft)…

Q: 2.29. A cylindrical steel shaft is required to transmit a bending moment of 1000 Nm and a torque of…

Q: 4. A solid shaft 125 mm in diameter transmits 120 KW at 160 rpm. Taking C = 8 x 10 N/mm² and length…

A: P=120 kWRPM, N=160C=G=8×104 N/mm2D=125 mmlength, L=7.5 m

Q: A 7/8 in. diameter shaft made out of ductile material is used to transmit power from motor. The…

Q: Design a suitable diameter for a circular shaft required to transmit 90 kW at 180 r.p.m. The shear…

A: GIVEN DATA- MAXIMUM SHEAR STRESS = 70MPa POWER P=90KW SPEED N=180 r.p.m. MAXIMUM TORQUE = 140% OF…

Q: for, the Shaft Shown in the figure Find: JS 1 maximum, Shear stresses in whole shaft? angle of twist…

A: INTRODUCTION : When torque is applied to the shaft, the shaft is susceptible to both twisting and…

Q: K T P A solid shaft is subjected to forces and a torque as shown in figure. The diameter of the…

A: According to the given information we have a diameter of shaft 35 mm, torque on shaft T is 75N-m,…

Q: Find the diameter of a shaft to tansmit twisting moments varying from 800 N-m to 1600 N-m. The…

A: GIVEN DATA MAXIMUM TORQUE T=1600N-m MINIMUM TORQUE T=800 N-m σut=600MPa σy=450 MPa Kt=1.2…

Q: 3.41 The constant wall thickness of a steel tube with the cross section shown is 2 mm. If a 600-N m…

Q: Shafts AC and DE have 50 mm radius and shear modulus G=79.3 Gpa. 60 kN.m Torque is applied to end E…

A: In the given figure, the torque on the shaft DE is 60 kN.m Radius of the shaft (r) = 50 mm G=79.3…

Concept explainers

Project Management Techniques

The guideways or the roadways that are undertaken to perform a project efficiently and all the tools required to accomplish the task are the general outlines for project management techniques.

Question

100%

5- Please solve this question in detail. Thanks

Q.5. A hollow circular shaft has an external diameter of 120 mm, and the internal diameter is
three-fourths the external diameter. If the stress at a fiber inside is 36 MPa, due to a torque T
applied, find this torque, the maximum shear stress, and the angle of twist per unit length. G = 85
MРа.

Expert Solution

This question has been solved!

Explore an expertly crafted, step-by-step solution for a thorough understanding of key concepts.

SEE SOLUTION Check out a sample Q&A here

Given that

VIEW

Calculations

VIEW

Step by step

Solved in 2 steps with 2 images

SEE SOLUTION Check out a sample Q&A here

Knowledge Booster

Learn more about

Need a deep-dive on the concept behind this application? Look no further. Learn more about this topic, mechanical-engineering and related others by exploring similar questions and additional content below.

Similar questions

A long, thin-walled tapered tube AB with a circular cross section (see figure) is subjected to a torque T. The tube has length L and constant wall thickness t. The diameter to the median lines of the cross sections at the ends A and B are dAand dB, respectively. Derive the following formula for the angle of twist of the tube: Hint: If the angle of taper is small, you may obtain approximate results by applying the formulas for a thin-walled prismatic tube to a differential element of the tapered tube and then integrating along the axis of the tube.
Solve the preceding problem if the length L = 56 in., the inner radius r1— 1.25 in., the angle of twist is 0.5°, and the allowable shear strain is 0.0004 rad.
A hollow steel shaft is stressed to 55 MPa by a torque of 100,000 ft-lb. If the inside diameter is 2/3 of the outside diameter and if G = 83 GPa, find the angle of twist in degrees if the shaft is 5 meters long.
4. A solid shaft 125 mm in diameter transmits 120 KW at 160 rpm. Taking C = 8 x 10 N/mm² and length of the shaft 7.5 m, find the maximum shear stress induced in the material of the shaft and the twist in radians.
Q2 /A hollow steel shaft transmits 200 kw of power at 150 rpm .The total angle of twist in length of 5 m of the shaft is 3°. Find the inner and outer diameters of the shaft if the permissible shear stress is 60mpa .G=80 Gpa .
Ahollow shaft with an external diameter of 150 mm transmits a maximum torque of 13 kNm. The shaft length is 5 m,and the maximum shear stress is limited to 40 MPa. If G = 84 x 103N/mm2, calculate;2.1 the internal diameter of the shaft.2.2 the angle of twist in degrees.2.3 the minimum shear stress in the shaft.
1. A solid circular shaft transmits 75 kW power at 200 rpm. Calculate the diameter of the shaft and the maximum shear stress acting on it, if the twist in the shaft is not exceeding 1° in 2 m length of the shaft. Take modulus of rigidity as 102 GPa.
3. A hollow aluminium tube used in a roof structure has an outside diameter 104mm and an inside diameter 82mm. The tube is 2.75m long and the aluminium has shear modulus G=28GPa. a. If the tube is twisted in pure torsion by torques acting at the ends, what is the angle of twist (in degrees) when the maximum shear stress is 48 MPa.b. What diameter d is required for a solid shaft to resist the same torque with the same maximum stress.c. What is the ratio of the weight of the hollow tube to the weight of the solid shaft
A shaft required to transmit 50kW of power will be running at 100rev/min. The maximum twist in 3m length of the shaft is limited to 1.5 degree. If the maximum torque is 30 percent more than mean or average torque. Assume entirely elastic action and take modulus of rigidity for the shaft material G = 135 GN/?2. Determine the following:a. Diameter of the shaft.b. Maximum shear stress developed in the shaft. I need answer ASAP. Thank you!
Find the twisting moment in a solid shaft 125 mm diameter when the angle of twist is 0.5 degree on a length of 1.8 m, the modulus of rigidity of the shaft material being 93 GN/m^2.
3.9 A square steel rod 20 mm on a side develops a tor- sional shear stress of 50 MPa when subjected to torque. Calculate the torque and the angle of twist over a length of 1.8 m. G = 80 GPa.
A hollow shaft with external and internal diameters 100 mm and 75 mm respectively transmits 500 kW at 1 500 r/min. If the measured angle of twist in a length of 3,5 m is 1,17°, calculate the shear strain at the inner and outer radii and the modulus of rigidity of the shaft material.