An aluminum alloy [E = 8400 ksi] pipe with a cross-sectional area of A₁ = 4.20 in.² is connected at flange B to a steel [E =23800 ksi] pipe with a cross-sectional area of A₂ = 2.96 in.². The assembly is connected to rigid supports at A and C. Assume L₁= 154 in., L₂= 200 in., and P = 56 kips. For the loading shown, determine: (a) the normal stresses in aluminum pipe (1) and steel pipe (2) (0₁.0₂ use positive if tensile, negative if compressive). (b) the deflection ug (use positive if it moves to the right and negative if it moves to the left) of flange B. (1) 4₁ B 42 (2)

An aluminum alloy [E = 8400 ksi] pipe with a cross-sectional area of A₁ = 4.20 in.² is connected at flange B to a steel [E =23800 ksi] pipe with a cross-sectional area of A₂ = 2.96 in.². The assembly is connected to rigid supports at A and C. Assume L₁= 154 in., L₂= 200 in., and P = 56 kips. For the loading shown, determine: (a) the normal stresses in aluminum pipe (1) and steel pipe (2) (0₁.0₂ use positive if tensile, negative if compressive). (b) the deflection ug (use positive if it moves to the right and negative if it moves to the left) of flange B. (1) 4₁ B 42 (2)

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

An aluminum alloy [E = 10,000 ksi; oy = 40 ksi] pipe (1) is connected to a bronze [E = 16,000 ksi; ay = 45 ksi] pipe at flange B. The pipes are attached to rigid supports at A and C. Pipe (1) has an outside diameter of 2.425 in., a wall thickness of 0.21 in., and a length of L₁ = 8 ft. Pipe (2) has an outside diameter of 5.00 in., a wall thickness of 0.20 in., and a length of L₂ = 14 ft. If a minimum factor of safety of 2.1 is required for each pipe, determine: (a) the maximum load P that may be applied at flange B. (b) the deflection of flange B at the load determined in part (a). Deflection to the right is positive. (2) (1) C Answer: (a) P = i (b) Ug = i P< L₁ B L₂ ! kips in.
A steel [E = 29,200 ksi; a = 6.5 x 10-6/°F] pipe column (1) with a cross-sectional area of A₁ = 5.20 in.² is connected at flange B to an aluminum alloy [E = 10,600 ksi; a = 13.0 × 106/°F] pipe (2) with a cross-sectional area of A2 = 4.20 in.². The assembly (shown in the figure) is connected to rigid supports at A and C. It is initially unstressed at a temperature of 91°F. Assume L₁ = 101 in., L₂ = 114 in., P = 23 kips. (a) At what temperature will the normal stress in steel pipe (1) be reduced to zero? (b) Determine the normal stresses (positive if tensile, negative if compressive) in steel pipe (1) and aluminum pipe (2) when the temperature reaches -18°F. A Answers: (a) T= (b) 01 = (1) L₁ i i B P L2 °F ksi
A steel [E = 30,600 ksi; a = 6.6 x 106/°F] pipe column (1) with a cross-sectional area of A₁ = 5.90 in.² is connected at flange B to an aluminum alloy [E = 10,600 ksi; a = 12.8 x 106/°F] pipe (2) with a cross-sectional area of A₂ = 4.00 in.². The assembly (shown in the figure) is connected to rigid supports at A and C. It is initially unstressed at a temperature of 96°F. Assume L₁ = 143 in., L₂= 184 in.. P = 30 kips. (a) At what temperature will the normal stress in steel pipe (1) be reduced to zero? (b) Determine the normal stresses (positive if tensile, negative if compressive) in steel pipe (1) and aluminum pipe (2) when the temperature reaches -14°F. Answers: (a) T= (b) 0₁ = 0₂ = L₁ i i B P 4₂ °F ksi ksi
A steel [E = 30,100 ksi; a = 6.3 x 10-6/°F] pipe column (1) with a cross-sectional area of A₁ = 5.80 in.² is connected at flange B to an aluminum alloy [E = 10,700 ksi; a = 13.1 x 10-6/°F] pipe (2) with a cross-sectional area of A₂ = 3.50 in.². The assembly (shown in the figure) is connected to rigid supports at A and C. It is initially unstressed at a temperature of 92°F. Assume L₁ = 115 in., L₂ = 149 in., P = 22 kips. (a) At what temperature will the normal stress in steel pipe (1) be reduced to zero? (b) Determine the normal stresses (positive if tensile, negative if compressive) in steel pipe (1) and aluminum pipe (2) when the temperature reaches -11°F. A (1) L₁ B P P L2 с
A steel [E = 30,300 ksi; a = 6.7 x 106/°F] pipe column (1) with a cross-sectional area of A₁ = 5.70 in.² is connected at flange B to an aluminum alloy [E = 10,100 ksi; a = 12.7 x 10-6/°F] pipe (2) with a cross-sectional area of A₂ = 4.30 in.². The assembly (shown in the figure) is connected to rigid supports at A and C. It is initially unstressed at a temperature of 90°F. Assume L₁ = 126 in., L₂ = 156 in., P = 34 kips. (a) At what temperature will the normal stress in steel pipe (1) be reduced to zero? (b) Determine the normal stresses (positive if tensile, negative if compressive) in steel pipe (1) and aluminum pipe (2) when the temperature reaches -11°F. A Answers: (a) T= (b) σ₁ = 0₂ = L₁ tel i L2 °F ksi ksi
3 An aluminum stepped shaft (E = 10 × 10³ ksi, v = 0.35), is subjected to three axial forces as shown. For P1= 100 lb, P2 = 128 lb, P3=386 lb, L1=2.5 in, L2= 2.0 in, L3= 1.0 in, determine the elongated/shortened length of section CD. [106 in] (sign sensitive) 1.5 in. DIC L; 1 in. B P₂ 0.5 in. L₁ A₁ P₁
H.W.6: A hollow circular cold-rolled bronze [G, = 6,500 ksi] tube (1) with an outside diameter of 1.75 in. and an inside diam- eter of 1.25 in. is securely bonded to a solid 1.25-in.-diameter cold-rolled stainless steel [G2 = 12,500 ksi] core (2) as shown in Figure and the allowable shear stress of core (2) is 60 ksi. Determine . The allowable shear stress of tube (1) is 27 ksi, (a) the allowable torque T that can be applied to the tube-and- core assembly. (b) the corresponding torques produced in tube (1) and core (2). (c) the angle of twist produced in a 10-in. length of the assembly by the allowable torque T. (1) T TA FIGURE
A clevis-type pipe hanger supports an 8-in.-diameter pipe, as shown in Figure. The hanger rod has a diameter of 1/2 in. The bolt connecting the top yoke and the bottom strap has a diameter of 5/8 in. The bottom strap is 3/16 in. thick by 1.75 in. wide by 36 in. long. The weight of the pipe is 2,000 lb. Determine the following: (a) the normal stress in the hanger rod, (b) the shear stress in the bolt, (c) the bearing stress in the bottom strap.
A clevis-type pipe hanger supports an 8-in.-diameter pipe, as shown in Figure. The hanger rod has a diameter of 1/2 in. The bolt connecting the top yoke and the bottom strap has a diameter of 5/8 in. The bottom strap is 3/16 in. thick by 1.75 in. wide by 36 in. long. The weight of the pipe is 2,000 lb. Determine the following: (a) the normal stress in the hanger rod, (b) the shear stress in the bolt, (c) the bearing stress in the bottom strap. Show FBD
Q-A solid 75-mm-diameter Aluminum [E = 80 GPa and 0.3 Poisson ratio] shaft that is 1.25-m long extends through and is completely bonded to a hollow brass |G = 25 GPa] tube, as shown in Figure. Brass tube (1) has an outside diameter of 10 cm, an inside diameter of 75 mm, and a length of 0.75 m. Both the aluminum shaft and the brass tube are securely attached to the wall support at A. When the two torques shown are applied to the composite shaft, determine: (a) The maximum shear stress magnitude in brass tube (1) and Aluminum shaft segment (2) and (3). (b) The rotation angle of joint B and the rotation angle of end c. (1) 30 KN m 12 kN-m Figure 0.5 m
A hollow steel [E = 30,000 ksi] tube (1) with an outside diameter of 3.125 in. and a wall thickness of 0.250 in. is fastened to a solid aluminum [E = 10,000 ksi] rod (2) that has a 1.875-in.-diameter and a solid 1.250-in.-diameter aluminum rod (3). The bar is loaded as shown. Assume L₁ = 70 in., L₂= 45 in., L3= 27 in., R = 36 kips, Q = 12 kips, and P = 24 kips. Determine (a) the change in length of steel tube (1). (b) the deflection of joint D with respect to the fixed support at A. (c) the maximum normal stress in the entire axial assembly. Answers: L₁ (a) 8₁ = (b) up= (c) Omax = GO Tutorial B Save for Later i tel R eTextbook and Media R L2 C L3 in. in. ksi Attempts: 0 of 5 used Submit Answer
A solid aluminum [E = 64 GPa] rod (1) is connected to a solid bronze [E = 114 GPa] rod (2) at flange B, as shown. Aluminum rod (1) has an outside diameter of 36 mm and bronze rod (2) has an outside diameter of 17 mm. The normal stress in the aluminum rod must be limited to 124 MPa, and the normal stress in the bronze rod must be limited to 92 MPa. Assume L1 = 168 mm and L2 = 399 mm. Determine: (a) the maximum downward load P that may be applied at flange B. (Answer: P = 146kN)(b) the deflection vB (downward is positive) of flange B at the load determined in part(a). (Answer: vB = .322 mm)