In the figure below, assume the pipe from B to C has a diameter of 4-inches, (f = 0.035), and length of 18-feet. Thepipe from DE is 187-feet, has a diameter of 4-inches and friction factor of 0.035. The Az = 69-feet. The elevation of Cis 14-feet above the lower water surface. If the pressure head @ C is to be no less than (-) 20 feet, and the pump has63% efficiency, what horsepower must be supplied to the pump in order to convey flow through the system? (Kent =0.8) Assume a submerged exit.Az

Name: In the figure below, assume the pipe from B to C has a diameter of 4-
Uploaded: 2024-03-20T06:56:55.000Z
Channel: Bartleby
Description: In the figure below, assume the pipe from B to C has a diameter of 4-inches, (f = 0.035), and length of 18-feet. Thepipe from DE is 187-feet, has a diameter of 4-inches and friction factor of 0.035. The Az = 69-feet. The elevation of Cis 14-feet abo

Length of Pipe BC, LBC = 18 ftLength of pipe DE, LDE = 187 ftFriction factor, f = 0.035Kent = 0.8…

Answered: above the lower water surface. If the…

Engineering

Mechanical Engineering

above the lower water surface. If the ency, what horsepower must be supp

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

6. A pump is located 4.5 m to one side of, and 3.5 m above a reservoir. The pump is designed for a flow rate of 6 L s'. For satisfactory operation, the static pressure at the pump inlet must not be lower than -6 m of the water gage. Determine the smallest standard commercial steel pipe that will give the required performance. pump 4.5 m. 1.8 19=d 3.5 m 7. water 90° elbow
2 .. The pressure of water in a domestic supply line was measured using manometer shown in the figure. Derive the equation for head and determine the pressure. of 50 mm 150 mm
Figure below shows a siphon that is used to draw water from a tank. The siphon tube has an inside area of . The exit nozzle at point F has an inside area of . The distances are , , and , respectively. Find the pressure at point D_______ A. 5.74 kPa (gage) B. -5.74 kPa (gage) C. 5.74 kPa (absolute) D. -5.74 kPa (absolute)
last three digits of your number for the upstream pressure: 754
10.0 m 200 m 2. An old western town has a water tower to deliver water to the residents. Pictured above is the water tower. The water tower is closed but there is a section of air that is atmospheric pressure just above the water. The corsss ectional area at point 2 is 4.75 x 10 m. The cross sectional area fot the water tower is very large. What is the speed of the water coming out of the pipe at point 2? (density of water = kg/m³) 3. On a vacation trip up in Oregon my boys decided to build a 10 kg raft that they made out of driftwood. 1000
A vessel cylindrical in shape and closed at the top and bottom is 300 mm in diameter, 1 m long and contains water up to a depth of 0.8 m. The air above the water surface is at a pressure of 60 kN/m2. If the vessel is rotated at a speed of 250 r.p.m. about its vertical axis find the pressure head (in cm of water) at the bottom edge of the vessel. a.845 b.567.2 c.643.9 d.722.5
-Example the values. asystem total head. against for the initial condition, show below - give the Lallowiny data dynamic uiscosity of liquid Calculate capacity curve density S-1200 kgim3 Static head on Suction Side 7S-3m Static heac on discharge Side Zd= 7m inside diameter of pipe di = o.052m -pipe roughress E3D0.00045m. gas pressure aboue the liquid in the tank Side of the pump the Suction Ps= atmospheric pressure. gas pressure above the liquicd in the tank on discharge side of the pump. the dund Pd= atmesperic pressure
The plunger diameter of a single-acting reciprocating pump is 115 mm and the stroke is 230 mm. The suction pipe is 90 mm in diameter and 4.2 m long. If cavitation takes place at the suction head of 4 m, the barometer stands at 10.3 m of water, and the water level in the sump is 3 m below the pump cylinder axis.1. Find the maximum allowable speed to operate the pump
9. A siphon draws oil (sg=0.86) as shown in the figure. Determine the pressure at point "B", kPa. * 3.0 m Oil (sg = 0.86) 10.0 m 50-mm inside diameter 25-mm diameter
8. A siphon draws oil (sg=0.86) as shown in the figure. Determine the pressure at point "A", kPa. * 3.0 m Oil (sg = 0.86) 10.0 m 50-mm inside diameter 25-mm diameter
Q3: calculate the total residual flow using the following data Static pressure: 55 psi Residual pressure: 41 psi Pitot pressure: 26 psi Outlet size: 6 inches Also, calculate the predicted flow at the desired residual pressure of 20 psi
Problem 1 : A water tower holds a total volume of 100,000 L of water (10oC). The diameter of the tank is 6 m. The bottom of the tank (elevation 1030 m) connects to an outlet pipe (diameter 1/2 m) for supplying water to the water main (elevation 990 m). According to the local guidelines, pressure at any point along the water main must be between 30 and 60 psi (including the junction point with the outlet pipe). How will be water tower’s discharge rate (in gpm) be designed?