A steel piston ring has a mean diameter of 69.7 mm, a radial height h 4.2 mm, and a thickness b-3 mm. The ring is assembled using an expansion tool that separates the split ends a distance ō by applying a force Fas shown. The Inner radius, r, Is 32.75 mm and the outer radius, is 36.95 mm. Use Castigliano's theorem and determine the force Fneeded to expand the split ends a distance 5-1 mm. t. The force needed to expand the spilt ends a distance of 1 mm is N.

A steel piston ring has a mean diameter of 69.7 mm, a radial height h 4.2 mm, and a thickness b-3 mm. The ring is assembled using an expansion tool that separates the split ends a distance ō by applying a force Fas shown. The Inner radius, r, Is 32.75 mm and the outer radius, is 36.95 mm. Use Castigliano's theorem and determine the force Fneeded to expand the split ends a distance 5-1 mm. t. The force needed to expand the spilt ends a distance of 1 mm is N.

International Edition---engineering Mechanics: Statics, 4th Edition

4th Edition

ISBN:9781305501607

Author:Andrew Pytel And Jaan Kiusalaas

Publisher:Andrew Pytel And Jaan Kiusalaas

Chapter9: Moments And Products Of Inertia Of Areas

Section: Chapter Questions

Problem 9.94RP: The properties of the unequal angle section are Ix=80.9in.4,Iy=38.8in.4, and Iu=21.3in.4. Determine...

See similar textbooks

Similar questions

Q 2 A steel flat plate of 20 mm thickness, uniformly tapers from 200 mm to 100 mm width in the a length of 500 mm. Find the extension of the plate if an axial pull of 40 kN is applied at its ends.
A steel flat plate of 20 mm thickness, uniformly tapers from 200 mm to 100 mm width in the a length of 500 mm. Find the extension of the plate if an axial pull of 40 kN is applied at its ends.
This is my Question... Determine the vertical displacement of joint C . EA is constant Determine the Vertical Displacement of the Joint C. EA is Constant Thank You Very Much
STRENGTH OF MATERIALS (NO LONG EXPLANTION NEEDED. RATE WILL BE GIVEN) Two blocks of wood, 50 mm wide and 20 mm thick are glued together as shown. If P is 600N, the shearing stress in the glued joint is
A 2.4 diameter steel molding is lifted by 4 steel cables as shown. The mold weighs 3 kN/m. (a) what is the required diameter of wire that will not exceed the allowable stress of 120 MPa. and (b) if the wire diameter increase by 20%, find the vertical displacement of the molding. 24m
The bar in the attached picture has a thickness of 16mm and a total width of 48mm. The pin has an diameter of 11mm.....
2.5 in. -3 in. A t 1 in. 2 in. 6 in. В 2 in. 2 in. 2 in. ENTER YOUR ANSWERS BELOW AND SHOW ALL YOUR WORK ON PAPER. A steel forging consists of a 6x2x2 -in. rectangular prism and two cylinders of diameter 2 in. and length 3 in. The weight of the rectangular prism is 6.81 Ib. The weight of the cylinders (each) is 2.67 Ib. Calculate: THE MASS MOMENT OF INERTIA OF THE 6x2x2 -in. RECTANGULAR PRISM WITH RESPECT TO THE X- AXIS is Ib-s?/ft THE MASS MOMENT OF INERTIA OF EACH CYLINDER WITH RESPECT TO THE X-AXIS is Ib-s?/ft THE TOTAL MASS M-OMENT OF INERTIA OF THE COMPOSITE SHAPES WITH RESPECT TO THE X-AXIS is Ib-s?/ft
An aluminum alloy cylindrical roller with diameter 1.25 in and length 2 in rolls on the inside of a cast-iron ring having an inside radius of 6 in, which is 2 in thick. Find the maximum contact force F that can be used if the shear stress is not to exceed 4000 psi.
The maximum torsional shear stress of a shaft with diameter D can be found at what distance from the center of the shaft?
Solve for the indentation diameter if the BHN of the material is 70 and a 500 kg of load is applied? Use indenter diameter 10mm.
The horizontal cross-section of the cast-iron standard of a vertical drilling machine has the form shown. The line of thrust of the drill passes through P. Find the greatest value the thrust may have without the tensile stress exceeding 15 MN/m2. What will be the stress along the face AB? (Cambridge) ANSWER: 17.68 kN; 11.8 MN/m2 compressive.
The properties of the unequal angle section are Ix=80.9in.4,Iy=38.8in.4, and Iu=21.3in.4. Determine Ixy.