A standard vapor compression system produces 20 tons of refrigeration using R-12 as a refrigerant while operating between a condenser temperature of 42 C and an evaporator temperature of -25 C. Determine (a) the refrigerating effect in kJ/kg, (b) the circulating rate in kg/s, (c) the power supplied, (d) the COP, (e) the heat rejected in kW, and (f) the volume flow rate in L/s.

A standard vapor compression system produces 20 tons of refrigeration using R-12 as a refrigerant while operating between a condenser temperature of 42 C and an evaporator temperature of -25 C. Determine (a) the refrigerating effect in kJ/kg, (b) the circulating rate in kg/s, (c) the power supplied, (d) the COP, (e) the heat rejected in kW, and (f) the volume flow rate in L/s.

Refrigeration and Air Conditioning Technology (MindTap Course List)

8th Edition

ISBN:9781305578296

Author:John Tomczyk, Eugene Silberstein, Bill Whitman, Bill Johnson

Publisher:John Tomczyk, Eugene Silberstein, Bill Whitman, Bill Johnson

Chapter45: Domestic Refrigerators And Freezers

Section: Chapter Questions

Problem 2RQ: The operating condition for the single compressor in a household refrigerator is the lowest box...

See similar textbooks

Similar questions

Condensers in these refrigerators are all_______cooled.
Refrigerators currently being manufactured in the United States are using______as their refrigerant.
The operating condition for the single compressor in a household refrigerator is the lowest box temperature, which is typically A. 0F B. -20F C. 20F D. 40F
A standard vapor compression system produces 20 tons of refrigeration using R134a while operating between a condenser temperature of 45 deg-C and an evaporator temperature of -25 deg-C. Determine the refrigerating effect per unit of refrigerant, circulation rate in kg/s, power supplied, COP, heat rejected in kW, the volume flow rate in L/s, and temperature at the compressor discharge.
A standard vapor compression system produces 20 tons of refrigeration using R-12 as arefrigerant while operating between a condenser temperature of 41.6 oC and anevaporator temperature of –25 oC. Determine (a) the refrigerating effect in kJ/kg, (b) thecirculating rate in kg/s, (c) the power supplied, (d) the COP, (e) the heat rejected in kW,and (f) the volume flow rate in L/s.
Refrigerant 22 is the working fluid in a Carnot vapor refrigeration cycle for which the evaporator temperature is 0ºC. Saturated vapor enters the condenser at 40ºC, and saturated liquid exits at the same temperature. The mass flow rate of refrigerant is 3 kg/min. Determine(a) the rate of heat transfer to the refrigerant passing through the evaporator, in kW.(b) the net power input to the cycle, in kW.(c) the coefficient of performance.
A 10-kW cooling load (i.e., ?̇ L) is to be served by operating an ideal vapor-compression refrigeration cycle with its evaporator at 400 kPa and its condenser at 800 kPa. If the compressor’s isentropic efficiency is set at 68%, determine (a) the mass flow rate of the refrigerant, in kg/min (b) the rate of heat rejection to the environment, in kW (c) the COP of the refrigerator Disregard any heat loss in the expansion valve and compressor as well as the change in potential and kinetic energy of the refrigerant in any part of the cycle. Use g = 9.81 m/s2 or 32.2 ft/s2 , T(K)=T(°C)+273 and T(R)=T(°F)+460, where applicable.
2. A refrigeration system using R-12 is to have a refrigerating capacity of 60 kW. The evaporating temperature is 10°C and the condensing temperature is 42°C. Determine (a) the volume flow rate of refrigerant at inlet to the compressor, (b) the power required by the compressor, and (c) the fraction of vapor mixture at entrance to the evaporator expressed both on a mass basis and volume basis.
A standard vapor compression system produces 20 tons of refrigeration using r-12 while operating between a condenser temperature of 45 deg-C and an evaporator temperature of -25 deg-C. Determine the refrigerating effect per unit of refrigerant, circulation rate in kg/s, power supplied, COP, heat rejected in kW, the volume flow rate in L/s, and temperature at the compressor discharge. Please answer completely.
A two-stage refrigeration system operates with ammonia refrigerant flowing at the rate of 15 kg/min through the evaporator. The saturation temperature in the condenser and evaporator units have been noted to be 40⁰C and - 15⁰C respectively. If the system has intercooling by liquid refrigerant at 4.25 bar, determine (a) The capacity and COP of the system. (b) How will these parameters be affected if the compression is carried out in a single stage unit ; the operating temperature limits remaining the same? Use the p-h chart and property tables for saturated ammonia refrigerant
In an ideal vapour-compression refrigeration cycle, refrigerant R-12 enters the compressor as a saturated vapour at −18 degree C and leaves the condenser as a saturated liquid at 25 degree C. The mass flow rate of the refrigerant is 0.5 kg/s, and the pressure drop in the evaporator and the condenser are negligible. Calculate: a) the refrigeration effect (rate of refrigeration or heat transfer rate in the evaporator) b)power consumed by the compressor c)the coefficient of performance of the refrigerator) d)qualityof the refrigerant after the expansion valve e)heat transfer rate in the condenser
Refrigerant 22 is the working fluid in a Carnot vapor refrigeration cycle for which the evaporator temperature is -30°C. Saturated vapor enters the condenser at 36°C, and saturated liquid exits at the same temperature. The mass flow rate of refrigerant is 10 kg/min. Determine the rate of heat transfer to the refrigerant passing through the evaporator, in kW,