A person is standing on a section of uniform scaffolding as shown in the figure. The section of scaffolding is L = 1.50 m in length, has a ms = 25.5 kg mass, and is supported by three ropes as shown. Determine the magnitude of the tension in each rope when a person with a weight of Wp = 660 N is a distance d = 0.700 m from the left end.

A person is standing on a section of uniform scaffolding as shown in the figure. The section of scaffolding is L = 1.50 m in length, has a ms = 25.5 kg mass, and is supported by three ropes as shown. Determine the magnitude of the tension in each rope when a person with a weight of Wp = 660 N is a distance d = 0.700 m from the left end.

Principles of Physics: A Calculus-Based Text

5th Edition

ISBN:9781133104261

Author:Raymond A. Serway, John W. Jewett

Publisher:Raymond A. Serway, John W. Jewett

Chapter10: Rotational Motion

Section: Chapter Questions

Problem 28P: A uniform beam resting on two pivots has a length L = 6.00 m and mass M = 90.0 kg. The pivot under...

See similar textbooks

Similar questions

A uniform beam resting on two pivots has a length L = 6.00 m and mass M = 90.0 kg. The pivot under the left end exerts a normal force n1 on the beam, and the second pivot located a distance = 4.00 m from the left end exerts a normal force n2. A woman of mass m = 55.0 kg steps onto the left end of the beam and begins walking to the right as in Figure P10.28. The goal is to find the womans position when the beam begins to tip. (a) What is the appropriate analysis model for the beam before it begins to tip? (b) Sketch a force diagram for the beam, labeling the gravitational and normal forces acting on the beam and placing the woman a distance x to the right of the first pivot, which is the origin. (c) Where is the woman when the normal force n1 is the greatest? (d) What is n1 when the beam is about to tip? (e) Use Equation 10.27 to find the value of n2 when the beam is about to tip. (f) Using the result of part (d) and Equation 10.28, with torques computed around the second pivot, find the womans position x when the beam is about to tip. (g) Check the answer to part (e) by computing torques around the first pivot point. Figure P10.28
A person is standing on a section of uniform scaffolding as shown in the figure. The section of scaffolding is L = 1.50 m in length, has a m. = 34.5 kg mass and is supported by three ropes as shown. Determine the magnitude of the tension in each rope when a person with a weight of W, = 820 N is a distance d = 0.700 m from the left end. magnitude of T, magnitude of T, magnitude of T, N N N 40.0° 0.700 m 1.50 m
A person is standing on a section of uniform scaffolding as shown in the figure. The section of scaffolding is L = 1.50 m in length, has a ms = 24.5 kg mass and is supported by three ropes as shown. Determine the magnitude of the tension in each rope when a person with a weight of Wp = 640 N is a distance d = 0.700 m from the left end. magnitude of T1 N magnitude of T2 N magnitude of T3 N
A person is standing on a section of uniform scaffolding as shown in the figure. The section of scaffolding is L = 1.50 m in length, has a mg = 22.0 kg mass and is supported by three ropes as shown. Determine the magnitude of the tension in each rope when a person with a weight of Wp = 580 N is a distance d = 0.700 m from the left end. magnitude of T1 magnitude of T2 magnitude of T3 40.0° 0.700 m 1.50 m
Consider a rigid steel beam of length L = 13.5 m and mass mb = 420 kg resting on two supports, one at each end. A worker of mass mw = 61 kg sits on the beam at a distance x from support A. Refer to the figure, though note that it is not drawn to scale. Enter an expression for the force support B must exert on the beam in order for it to remain at rest, in terms of defined quantities, x, and g.
A 11.0-kg monkey climbs a uniform ladder with weight w = 1.40 × 102 N and length L = 2.60 m as shown in the figure below. The ladder rests against the wall and makes an angle of 0 = 60.0° with the ground. The upper and lower ends of the ladder rest on frictionless surfaces. The lower end is connected to the wall by a horizontal rope that is frayed and can support a maximum tension of only 80.0 N. Rope (a) Draw a force diagram for the ladder. Choose File no file selected This answer has not been graded yet. (b) Find the normal force exerted on the bottom of the ladder. (c) Find the tension in the rope when the monkey is two-thirds of the way up the ladder. N (d) Find the maximum distance d (along the ladder) that the monkey can climb up the ladder before the rope breaks. (e) If the horizontal surface were rough and the rope were removed, how would your analysis of the problem change? What other information would you need to answer parts (c) and (d)? This answer has not been graded yet.…
Consider a rigid steel beam of length L = 13 m and mass mb = 378 kg resting on two supports, one at each end. A worker of mass mw = 61 kg sits on the beam at a distance x from support A. Refer to the figure, though note that it is not drawn to scale. Enter an expression for the force support B must exert on the beam in order for it to remain at rest, in terms of defined quantities, x, and g. FB = When the worker sits at a distance x = 8.5 m from support A, calculate the force, in newtons, that support B must exert on the beam in order for it to remain at rest. Use g with three significant figures. FB =The force exerted on the beam by support A is measured and found to be FA = 2280 N. At what distance x, in meters, from support A is the worker sitting now? x =
A 10.0-kg monkey climbs a uniform ladder with weight w = 1.09 x 10 N and length L = 3.40 m as shown in the figure below. The ladder rests against the wall at an angle of 6 = 60°. The upper and lower ends of the ladder rest on frictionless surfaces, with the lower end fastened to the wall by a horizontal rope that is frayed and that can support a maximum tension of only 80.0 N. Rope (a) Draw a force diagram for the ladder. (Submit a file with a maximum size of 1 MB.) (b) Find the normal force exerted on the bottom of the ladder. N (c) Find the tension in the rope when the monkey is two-thirds of the way up the ladder. N (d) Find the maximum distance that the monkey can climb up the ladder before the rope breaks. m (e) If the horizontal surface were rough and the rope were removed, how would your analysis of the problem be changed and what other information would you need to answer Parts (c) and (d)?
Consider a rigid steel beam of length L = 14 m and mass mb = 405 kg resting on two supports, one at each end. A worker of mass mw = 68 kg sits on the beam at a distance x from support A. Refer to the figure, though note that it is not drawn to scale. a. When the worker sits at a distance x = 7.5 m from support A, calculate the force, in newtons, that support B must exert on the beam in order for it to remain at rest. Use g with three significant figures. b. The force exerted on the beam by support A is measured and found to be FA = 2240 N. At what distance x, in meters, from support A is the worker sitting now?
A 2.4 m ladder rests on a vertical wall as shown in the figure. The ladder has 7 rungs and the rungs are spaced 0.30 m apart, and the top and bottom rungs are 0.30 m from their respective ends of the ladder. Surfaces at A and B both have the same coefficient of friction. If a worker weighs 360 N and stands on the middle rung, determine the minimum value of the coefficient of friction so that the ladder does not slide. Neglect the weight of the ladder.
It's exciting watching the construction and renovation happening in Uptown Columbus! On one construction site, you notice that a uniform beam of length 13.6 m and mass 47.9 kg is attached to a wall by a cable. The angle between the cable and the beam is 59.5°. The beam is free to pivot about the point where it attaches to the wall. What is the tension in the cable, if the beam is not moving? Your Answer: Answer
A uniform beam of mass M = 10.0 kg and length L = 2.00 m is suspended from a ceiling at an angle of 30° below the horizontal. The beam is attached to the ceiling by a hinge at one end and a light support rope attached to the other end. What is the magnitude of the force by the hinge? 30° L= 2.0 m M= 10.0 kg