9.1. An ice crystal in the form of a thin hexagonal plate grows by diffusion in an environment saturated with respect to water at a temperature of -4°C and a pressure of 80 kPa. Determine the time required for it to grow to a diameter of 1 mm, starting from a mass of 10-8 g. Take the capacity (capacitance, C) to be that of the circumscribing disk. Assume that the mass and the diameter of the plate are related by m = 1.9 X 10-2D³, with mass in g and D in cm. Neglect ventilation effects. If diameter and fall speed are related by u = KD; where K = 520 s-1, determine the distance the crystal falls during the growth to 1mm diameter.

9.1. An ice crystal in the form of a thin hexagonal plate grows by diffusion in an environment saturated with respect to water at a temperature of -4°C and a pressure of 80 kPa. Determine the time required for it to grow to a diameter of 1 mm, starting from a mass of 10-8 g. Take the capacity (capacitance, C) to be that of the circumscribing disk. Assume that the mass and the diameter of the plate are related by m = 1.9 X 10-2D³, with mass in g and D in cm. Neglect ventilation effects. If diameter and fall speed are related by u = KD; where K = 520 s-1, determine the distance the crystal falls during the growth to 1mm diameter.

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

5. a. Determine the diffusion coefficient for zinc diffusing into copper at 200°C. b. Create a plot showing diffusion coefficient vs. temperature for zinc diffusing into copper over the range of 0°C to 600°C. Include a minimum of six data points (you may use Excel for the repetitive calculations). What does the shape of the curve tell you about the dependence of diffusion rate on temperature? c. Determine the diffusion coefficient for nickel diffusing into copper at 200°C. Explain why the value differs from that found in Part a.
5. The sketch shows a cylindrical hollow fiber with membrane walls. Species 'A' is undergoing steady-state diffusion through the membrane wall where its concentrations at the inner and outer membrane walls are CAI, and CA2, respectively. It can be assumed that the membrane wall eliminates any bulk diffusion effects and that the diffusion flux follows Fick's Law with a membrane diffusion coefficient, DAM- (a) Solve for the concentration profile of 'A' in the membrane wall in terms of the dimensions of the fiber and concentrations at R₁ and R₂. (b) Solve for the molar flux of 'A' leaving the outer wall of the membrane. XA2 XB2 FIBER WALL *****
1. A steel sphere 3” in diameter heated to 600oF, is to be cooled by immersion in an oil bath at 100oF. Calculate the average temperature of the sphere a) 10 sec and b) 6 min after immersion. For steel, k = 26Btu/ft-h-oF;  = 486lb/ft3 ; Cp = 0.11Btu/lboF.
A new temperature scale is designed with freezing of water at 50 X and boiling at atmospheric pressure occurring at 300 X. Derive a conversion between degrees Celsius and degrees X and convert the following reading: (a) 80 C to X
Please kindly help. I will give a like. Thank you! a. Describe the S-curve model of diffusion on how does ‘rate of adoption’ change over time? At which-point is the rate of diffusion the fastest? b. S-curve model of diffusion: (true/false) and reasoning - k = 0, the rate of diffusion is instantaneous? - fixed k ≥ 0, the carrying capacity is determined only by the ratio of a and b? - fixed k ≥ 0, the rate of diffusion is determined only by the ratio of a and b? c. The diffusion of hybrid corn in the 1940s, who or which region seems to have adopted the hybrids more quickly and why?
In the following set of questions, we will consider a mercury-in-glass thermometer. The tworeference points will be assigned 0.01◦C and 100◦C based on the triple point and boiling point ofwater. a) Remark on the the rationale for selecting references based on phenomena such as phase transi-tions. Identify any prospective issues or special considerations one might have with this approach? b) Draw a schematic of a mercury-in-glass thermometer. Define an appropriate set of universe,system, and surroundings and explain the functional operation of thermometer from a thermody-namic analysis perspective. In your response, you should describe how energy flows and influencesmatter. Is your system open or closed? What kind of boundary do you have? What kind ofapproximations (if any) do you make for the reliable determination of temperature based on yourdecomposition of universe, system, and environment?
Carbon idallowed to diffuse through a steel plate 23.1 mm thick. The concentrations of carbon at the two faces are0.71 gnand 01g whhare mataontant It the pre exponential and activation energy are 0.0000006 ms and 75453 Mmol respectively compute the temperature at which the diffution fa in 52 10 P Give your answer in degrees.Celsius to 1 decimal place
Please show the complete solution and step-by- step solution. Thank you.
1. 4000L/hr of distillates are cooled from 21 to 12 degrees Celsius, and wax is separated 12% by weight at 15 degrees Celsius. Oil has a specific heat of 2kJ/kg C and a specific gravity of 0.87. The latent heat of fusion is 290kJ/kg, and the specific heat of wax is 2.5. Allow 10% for losses and calculate the refrigerating machine's capacity in TOR.
10.7 One of the Hume-Rothery rules for solid solutions11 is that the solubilityof solute B in solvent A becomes negligible when the atomic radii of A andB differ by more than 15%. Plot the maximum solubility (atomic percent) of Ni, Pt, Au, Al, Ag, and Pb as a function of the ratio of solute and solvent (Cu) radii, and verify that the solid solubility in Cu drops precipitously at a size ratio of about 1.15. Use the following data:rNi = 0.1246 nm rAl = 0.143 nmrAg = 0.1444 nmrPt = 0.139 nm rPb = 0.1750 nmrCu = 0.1278 nm rAu = 0.1441 nm
Show the complete step-by-step solution.
PROBLEMS 1. Accumulation represents the change in mass in the reactor per change in time. For a constant-volume system, it can be simply formulated as ,dc Accumulation = V“ dt (28.1) where V = volume and e = concentration. Thus, a mathematical formulation for accu- mulation is volume times the derivative of e with respect to t. Solution. Equations (28.1) and (12.1) can be used to represent the mass balance for a single reactor such as the one shown in Fig. 28.1: dc V = Qcm - Qc (28.2) dt Accumulation = inputs – outputs Equation (28.2) can be used to determine transient or time-variable solutions for the reactor. For example, if c = co at t = 0, calculus can be employed to analytically solve G = 50 mg/m², Q = 5 m'/min, V = 100 m²., and co = 10 mg/m², Use Euler's method to find the solution of e from t = 0 to 40 s with a step size (h) of 10 s.