500 kilograms of dressed chicken enter a chiller at 10°C are frozen and chilled to a final temperature of -15°C for storage in 20 hours. Compute the product load. Specificheat above freezing............3.2 kJ/kg-°K Specific heat below freezing............1.6 kJ/kg-°K Latent heat...........250 kJ/kg Freezing Temperature.......... -5°C A. 2.18 kw B. 6.67 kw C. 3.67 kw D. 7.67 kw

500 kilograms of dressed chicken enter a chiller at 10°C are frozen and chilled to a final temperature of -15°C for storage in 20 hours. Compute the product load. Specificheat above freezing............3.2 kJ/kg-°K Specific heat below freezing............1.6 kJ/kg-°K Latent heat...........250 kJ/kg Freezing Temperature.......... -5°C A. 2.18 kw B. 6.67 kw C. 3.67 kw D. 7.67 kw

Principles of Heat Transfer (Activate Learning with these NEW titles from Engineering!)

8th Edition

ISBN:9781305387102

Author:Kreith, Frank; Manglik, Raj M.

Publisher:Kreith, Frank; Manglik, Raj M.

Chapter1: Basic Modes Of Heat Transfer

Section: Chapter Questions

Problem 1.23P: Using the information in Problem 1.22, estimate the ambient air temperature that could cause...

See similar textbooks

Similar questions

bliuzodt to mopolb 9. If machine parts are degreased by means of kerosene as shown in the diagram, how much kerosene make-up is needed per day? How much kerosene has to enter the degreasing vat per day? There are about 3 lb of grease per 100 lb of machine parts, and 60 tons of machine parts are processed each day. Five thousand pounds of kerosene (the 10% solution) are carried away by the machine parts each day but drip off and are caught and put back in the degreasing vat. Two hundred pounds of the 10% solution are lost each day from the vat by evaporation, spillage, or by being carried away.
To maximize production and minimize pumping costs, crude oil is heated to reduce its viscosity during transportation from a production field. (1) Consider a pipe-in-pipe configuration consisting of concentric steel tubes with an intervening insulating material. The inner tube is used to transport warm crude oil through cold ocean water. The inner steel pipe (k, = 45 W/m-K) has an inside diameter of D;, 1 150 mm and wall thickness f; = 20 mm while the outer steel pipe has an inside diameter of D; 2 = 250 mm and wall thickness t, = tị. Determine the maximum allowable crude oil temperature to ensure the polyurethane foam insulation (k, between the two pipes does not exceed its maximum service temperature of Tp. max = 70°C. The ocean water is at T.0 = -5°C and provides an external convection heat transfer coefficient of h. flowing crude oil is h; = 450 W/m²-K. 0.03 W/m-K) 500 W/m2-K. The convection coefficient associated with the (2) It is proposed to enhance the performance of the…
4. Five hundred kilograms of poultry enter a chiller at 8°C and are frozen and chilled to a final temperature of -18°C for storage in 15 hours. The specific heat above and below freezing are 3.18 kJ/kg-°C and 1.55 kJ/kg-°C respectivel. The latent heat is 246 kJ/kg and the freezing temperature is -5 °C. Compute the product load.
1. 4000L/hr of distillates are cooled from 21 to 12 degrees Celsius, and wax is separated 12% by weight at 15 degrees Celsius. Oil has a specific heat of 2kJ/kg C and a specific gravity of 0.87. The latent heat of fusion is 290kJ/kg, and the specific heat of wax is 2.5. Allow 10% for losses and calculate the refrigerating machine's capacity in TOR.
Problems 1. An iron casting of mass 10 kg has an original temperature of 200°C. If the casting loses heat to the value of 715.5 kJ, what is the final temperature? Take C=477J/kgK. Ans:323K
The brewing process involves 4 steps. Boiling, Fermenting, Filtering and Kegging. The batch size is 100 gallons for the boil and fermentation tanks. Process times for the different steps are Boiling: 8 hours/100 gal, Fermenting: 15 days/100 gal, Filtering: 10 gal/hour, Kegging 10 min/5 gal. In order to improve the productivity they decide to introduce a holding tank between the fermentation and filtration steps. They are able to drain the fermentation tank at a rate of 30 gal/hour. Ferment WIP Keg Boil Filter What is the minimum WIP tank size they need? (Round your answer to the nearest 10 gallons) Assume 24 hours/day
1.)An aluminum tank with a volume of 1000 liters is filled with gasoline. Both are at a temperature of 12°C. The tank is transported to a place where the temperature is 37° and, due to the difference between the volumetric expansion coefficients of the metal and the liquid, the ebb of the tank. Assuming the tank expands like a massive volume of aluminum, how many liters of gasoline overflow from the tank? Data: βaluminum=7*10-5/ºC and βgas=9.5*10-4/ºC
A liquid reactant solution is pumped through a pre-heater before entering a reaction vessel. The solution enters the pre-heater at 25 °C and must enter the reactor at 45 °C. The flow of the reactant solution is 1500 mL per minute. The density of the reactant solution is 0.91 g-cm3 and the heat capacity is 1.75 Jg1.K1. ASsume there is no heat loss in the pre-heater or between the pre-heater and the reactor. a. Draw a schematic of the pre-heater, detailing all mass and energy flows. b. Clearly define a system boundary. c. Write the general energy balance, and a simplified energy balance stating all assumptions that apply to this problem. d. What is the minimum power rating required for the pre-heater?
O Problem 2 (Exercise 1.8.22a) r------------------ Earlier experiments have shown that a certain component cools in air according to Newton's cooling law with constant of proportionality k = 0.2. At the end of the first processing stage, the temperature of the component is 120 °C. The component remains for 10 min in a large room and then enters the next processing stage. At that time the surface temperature is supposed to be 60 °C. What must the room temperature be for the desired cooling to take place? /
Show complete solution step by step
Given problem: Tolits is working on a restaurant famous for its soup. His end of shift is 5:00 pm and needs to go home by that time to pick up his wife, Marites for their anniversary date. A customer made a reservation at 5:15 pm and wants his soup to be ready at that exact time. To ensure the quality of the soup, it should be served at a temperature which is exactly 86C. Tolits needs to prepare the soup before the end of his shift. Initially, as Tolits is preparing the soup, its temperature is 21∘C and placed on a pan heated at 149∘C. After 5 minutes, its temperature is 36∘C. The soup is done (cooked) once its temperature is 120∘C. Tolits found out that cooling it in a sink full of cold water, while the faucet is running with the water resulting to roughly constant temperature of 26∘C, could bring the temperature of the soup to 86C to be ready at 5:15 pm. How many minutes before the end of the shift of Tolits should he start cooking soup so that he is done before 5:00 pm and his…
Please show step by step solution