5. Avocados are to be ripened at 1.04 bar in a storage room containing air, ethylene with a partial pressure of 3.5 kPa, and carbon dioxide at a partial pressure of 2 kPa. The balance will be air. If 0.08 kg of ethylene is charged to the storage container, determine the total mass of gas used. If the temperature of the storage room is maintained at 15 °C what is the density of the gas mixture?

5. Avocados are to be ripened at 1.04 bar in a storage room containing air, ethylene with a partial pressure of 3.5 kPa, and carbon dioxide at a partial pressure of 2 kPa. The balance will be air. If 0.08 kg of ethylene is charged to the storage container, determine the total mass of gas used. If the temperature of the storage room is maintained at 15 °C what is the density of the gas mixture?

Name: 5. draw schematic for the problem 5. Avocados are to be ripened at 1.0
Uploaded: 2024-03-20T06:56:55.000Z
Channel: Bartleby
Description: 5. draw schematic for the problem 5. Avocados are to be ripened at 1.04 bar in a storage room containing air, ethylene with a partialpressure of 3.5 kPa, and carbon dioxide at a partial pressure of 2 kPa. The balance will be air. If 0.08 kgof ethylen

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

7. In a sturdy closed container with a volume of 0.3m ^ 3, there is a wet steam of 300 kPa in pressure. When the total mass is 4 kg, calculate the mass and volume of liquid and water vapor, respectively. What is the pressure in the vessel when heated to 300C? P-v diagram or T-v diagram should be shown and the corresponding status and process should be indicated.
3. Sulfur dioxide at a temperature of 204 °C occupies a volume of 0.3 m3 A. If the volume is increased to 0.9 m3 while the pressure is maintained constant, what is the final temperature in °K ? B. If the initial volume is maintained constant and the pressure tripled, what is the final temperature?
A mixture of two liquids of equal volume is made, the one has a relative density of 0.8 and the other a density of 980kg/m³. What will be the weight of 2500 liters?
14. A bottle with a lid contains 0.0083kg of air at 64°C. If the volume of the air inside the bottle is 0.007m3 and the diameter of the lid is 0.35m, what will be the force required to close the lid? a. 11.4714kN b. 11.0385kN c. 11.7382kN d. 11.7035kN
3. Two liquids of different densities (p1 = 1500 kg/m3, p2 = 500 kg/m3) are poured together into a 100L tank, filling it. If the resulting density of the mixture is 800 kg/m3, find the weight of mass 1 and 2.
1. Oxygen at 30°C and 300 kPa absolute pressure expands isotherrnally to an absolute pressure of 120 kPa. Determine the final density of the gas. Ans. 1.52 kg/m³ 2. Air is enclosed by a rigid cylinder containing a piston. A pressure gage attached to the cylinder indicates an initial reading of 25 psi. Determine the reading on the gage when the piston has compressed the air to one-third its original volume. Assume the compression process to be isothermal and the local atmospheric pressure to be 14.7 psi. Ans. 104 psig 3. The viscosity of liquids can be measured through the use of a rotating cylinder viscometer of the type illustrated in Fig. P1.3. In this device the outer cylinder is fixed and the inner cylinder is rotated with an angular velocity w. The torque T, required to develop w is measured and the viscosity is calculated from these two measurements. Develop an equation relating u, w, T, e, Ro and Ri. Neglect end effects and assume the velocity distribution in the gap is linear.…
Volume 19. A tank contains 0.50 m^3/kg of steam. Heat is transferred at constant volume until the pressure reaches 100 kpa. Determine the final steam quality. of water havying ML valuo of tomne ture
PROBLEM SET 4 1. Oxygen at 30°C and 300 kPa absolute pressure expands isotherrnally to an absolute pressure of 120 kPa. Determine the final density of the gas. Ans. 1.52 kg/m³ 2. Air is enclosed by a rigid cylinder containing a piston. A pressure gage attached to the cylinder indicates an initial reading of 25 psi. Determine the reading on the gage when the piston has compressed the air to one-third its original volume. Assume the compression process to be isothermal and the local atmospheric pressure to be 14.7 psi. Ans. 104 psig
tank volume is 20 m³. Determine the density and specific volume of the mixture. 3. A cylindrical tank is 50 in. Long, has a diameter of 16 in., and contains 1.65 lb water. Calculate the specific volume and density of water. 4 A beer barrel has a mass of 10 kg and a volume of 20 liters Assuming the density of beer is 1000
7. An air bubble rises from the bottom of the well where the temperature is 20°C to the surface where the temperature is 50°C. If the existing atmospheric pressure at the surface of the well water is 101.3kPa, determine the percent increase in volume of the bubble if the pressure in the bottom of the well is 200kPag. Draw a figure or FBD that will support the problem. Explain each step by step formula.
18.A reservoir contains 2.83 cu. m of carbon monoxide at 6895 kPa and 23.6 degrees Celsius. An evacuated tank is filled from the reservoir to a pressure of 3497 kPa and a temperature of 12.4 degrees Celsius, while the pressure in the reservoir decreases to 6205 kPa and the temperature to 18.3 degrees Celsius. What is the volume of the tank? R for CO is 296.92 J/kg-K.
3. One kilogram of liquid having a density of 1200 kg/m³ is mixed with a 2 kg of another liquid having a density of 2000 kg/m?. If the volume of the mixture is the sum of the initial volumes, determine the density of the mixture.