13. One end of a uniform bar with mass 5.00 kg and length 0.800 m is attached to a vertical wall by a frictionless hinge. The bar is held at an angle of 36.9° by a light horizontal rope that is attached to the other end of the bar. What is the tension in the rope? (a) 40.9 N (b) 32.7 N (c) 24.5 N (d) 16.4 N (e) none of the above answers 36.9

13. One end of a uniform bar with mass 5.00 kg and length 0.800 m is attached to a vertical wall by a frictionless hinge. The bar is held at an angle of 36.9° by a light horizontal rope that is attached to the other end of the bar. What is the tension in the rope? (a) 40.9 N (b) 32.7 N (c) 24.5 N (d) 16.4 N (e) none of the above answers 36.9

Physics for Scientists and Engineers: Foundations and Connections

1st Edition

ISBN:9781133939146

Author:Katz, Debora M.

Publisher:Katz, Debora M.

Chapter14: Static Equilibrium, Elasticity, And Fracture

Section: Chapter Questions

Problem 30PQ: A 5.45-N beam of uniform density is 1.60 m long. The beam is supported at an angle of 35.0 by a...

See similar textbooks

Similar questions

A 20.0-kg horizontal plank 4.00 in long rests on two supports, one at the left end and a second 1.00 m from the right end. What is the magnitude of the force exerted on the plank by the support near the right end? (a) 32.0 N (b) 45.2 N (c) 112 N (d) 131 N (e) 98.2 N
Problems 33 and 34 are paired. One end of a uniform beam that weighs 2.80 102 N is attached to a wall with a hinge pin. The other end is supported by a cable making the angles shown in Figure P14.33. Find the tension in the cable. FIGURE P14.33 Problems 33 and 34.
(a) What force must be exerted by the wind to support a 2.50-kg chicken in the position shown in Figure 9.33? (b) What is the ratio of this force to the chicken's weight? (c) Does this support the contention that the chicken has a relatively stable construction? Figure 9.33
At a museum, a 1300-kg model aircraft is hung from a lightweight beam of length 12.0 m that is free to pivot about its base and is supported by a massless cable (Fig. P14.38). Ignore the mass of the beam. a. What is the tension in the section of the cable between the beam and the wall? b. What are the horizontal and vertical forces that the pivot exerts on the beam? FIGURE P14.38 (a) From the free-body diagram, the angle that the string tension makes with the beam is = 55.0 + 18.0 = 73.0, and the perpendicular component of the string tension is FT sin73.0. Summing torques around the base of the rod gives (Eq. 14.2): =0:(12.0m)(1300kg)(9.81m/s2)cos55.0+FT(12.0m)sin73.0=0FT=(12.0m)(1300kg)(9.81m/s2)cos55.0(12.0m)sin73.0FT=7.65103N Figure P14.38ANS (b) Using force balance (Eq. 14.1): Fx=0:FHFTcos18.0=0FH=FTcos18.0=[(12.0m)(1300kg)(9.81m/s2)cos55.0(12.0m)sin73.0]cos18.0=7.27103NFy=0:FVFTsin18.0(1300kg)(9.81m/s2)=0 FV=FTsin18.0+(1300kg)gFV=[(12.0m)(1300kg)(9.81m/s2)cos55.0(12.0m)sin73.0]sin18.0+(1300kg)(9.81m/s2)FV=1.51104N
A 5.45-N beam of uniform density is 1.60 m long. The beam is supported at an angle of 35.0 by a cable attached to one end. There is a pin through the other end of the beam (Fig. P14.30). Use the values given in the figure to find the tension in the cable. FIGURE P14.30
A massless, horizontal beam of length L and a massless rope support a sign of mass m (Fig. P14.78). a. What is the tension in the rope? b. In terms of m, g, d, L, and , what are the components of the force exerted by the beam on the wall? FIGURE P14.78
8. An object weighing 240 N is supported by a uniform 135 N horizontal beam as shown in the figure. The length of the beam is 2.40 m and the distance (x) is 1.95 m. Find the tension in the guy wire that is connected to the wall if the angle = 39º. N A X
4. A uniform rod 2 m long and weighing 65 N is pivoted to the wall as shown. A weight of 25 N is suspended at the other end of the rod. Find the magnitude of vertical and horizontal components of the force exerted on the pivot as well as the tension in the string. 90° 25 N 60° hinge
7. A uniform ladder of mass (m 56.0°, find the static friction force between the ladder and the floor when a 70.0-kg person stands three-quarters of the way up the ladder? %3D 15.0 kg) and length (L) leans against a frictionless wall, see figure. If the angle 0 = N 60 ss0 L 60 sfoc ssf60 ssf60 ssf60 ssf60 ssf60 ssf60 sf60 ssf60 ssf60 ssf60 sst 60 ssf60 O ssf60 ssf60 ssf60 ssf60 ssf60 ssf60 si
3. A uniform ladder of mass (m = 13.0 kg) and length (L) leans against a frictionless wall, see figure. If the angle 8 68.0°, find the static friction force between the ladder and the floor when a 85.0-kg person stands one- = third of the way up the ladder? N A L Ꮎ
4. A horizontal beam weighing 300 N is attached to a wall. It is supported by a cable which makes an angle of 30° with the horizontal beam. If a 60.0 kg block is placed 3.00 m from the wall, determine (a) the tension in the cable and (b) the horizontal and vertical components of the force exerted by the beam at point O. 60.0 kg 30.0° -10.0 m -
2 -53²=/ ا ما -